This is the latest recevied telemetry packets stored in our database for station/object IT9EWK-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1757814689 | 207 Count | 862 Count | 0 Count | 0 VDC | 0 VDC |
| 1757812886 | 206 Count | 858 Count | 0 Count | 0 VDC | 0 VDC |
| 1757811124 | 201 Count | 850 Count | 0 Count | 0 VDC | 0 VDC |
| 1757809320 | 200 Count | 838 Count | 0 Count | 0 VDC | 0 VDC |
| 1757805713 | 198 Count | 815 Count | 0 Count | 0 VDC | 0 VDC |
| 1757803909 | 197 Count | 799 Count | 0 Count | 0 VDC | 0 VDC |
| 1757802105 | 196 Count | 787 Count | 0 Count | 0 VDC | 0 VDC |
| 1757800301 | 195 Count | 775 Count | 0 Count | 0 VDC | 0 VDC |
| 1757798498 | 194 Count | 763 Count | 0 Count | 0 VDC | 0 VDC |
| 1757796694 | 193 Count | 751 Count | 0 Count | 0 VDC | 0 VDC |
| 1757794890 | 192 Count | 739 Count | 0 Count | 0 VDC | 0 VDC |
| 1757793087 | 191 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1757791283 | 190 Count | 717 Count | 0 Count | 0 VDC | 0 VDC |
| 1757789522 | 185 Count | 706 Count | 0 Count | 0 VDC | 0 VDC |
| 1757787718 | 184 Count | 694 Count | 0 Count | 0 VDC | 0 VDC |
| 1757784111 | 182 Count | 664 Count | 0 Count | 0 VDC | 0 VDC |
| 1757782307 | 181 Count | 648 Count | 0 Count | 0 VDC | 0 VDC |
| 1757780502 | 180 Count | 636 Count | 0 Count | 0 VDC | 0 VDC |
| 1757778699 | 179 Count | 624 Count | 0 Count | 0 VDC | 0 VDC |
| 1757776895 | 178 Count | 607 Count | 0 Count | 0 VDC | 0 VDC |
| 1757775092 | 177 Count | 587 Count | 0 Count | 0 VDC | 0 VDC |
| 1757773288 | 176 Count | 582 Count | 0 Count | 0 VDC | 0 VDC |
| 1757771484 | 175 Count | 576 Count | 0 Count | 0 VDC | 0 VDC |
| 1757769680 | 174 Count | 563 Count | 0 Count | 0 VDC | 0 VDC |
| 1757767918 | 169 Count | 551 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)