This is the latest recevied telemetry packets stored in our database for station/object SQ2MO-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782143807 | 230 Count | 961 Count | 48 Count | 0 VDC | 0 VDC |
| 1782142607 | 229 Count | 958 Count | 48 Count | 0 VDC | 0 VDC |
| 1782141406 | 224 Count | 953 Count | 48 Count | 0 VDC | 0 VDC |
| 1782140205 | 223 Count | 944 Count | 48 Count | 0 VDC | 0 VDC |
| 1782139005 | 222 Count | 938 Count | 48 Count | 0 VDC | 0 VDC |
| 1782136603 | 220 Count | 909 Count | 48 Count | 0 VDC | 0 VDC |
| 1782135403 | 219 Count | 900 Count | 48 Count | 0 VDC | 0 VDC |
| 1782134202 | 218 Count | 878 Count | 48 Count | 0 VDC | 0 VDC |
| 1782131801 | 204 Count | 833 Count | 36 Count | 0 VDC | 0 VDC |
| 1782130600 | 203 Count | 829 Count | 36 Count | 0 VDC | 0 VDC |
| 1782129409 | 198 Count | 824 Count | 36 Count | 0 VDC | 0 VDC |
| 1782128208 | 197 Count | 821 Count | 36 Count | 0 VDC | 0 VDC |
| 1782127008 | 196 Count | 814 Count | 36 Count | 0 VDC | 0 VDC |
| 1782125807 | 195 Count | 809 Count | 36 Count | 0 VDC | 0 VDC |
| 1782124607 | 194 Count | 783 Count | 36 Count | 0 VDC | 0 VDC |
| 1782123406 | 193 Count | 770 Count | 36 Count | 0 VDC | 0 VDC |
| 1782122205 | 192 Count | 765 Count | 36 Count | 0 VDC | 0 VDC |
| 1782121005 | 191 Count | 762 Count | 36 Count | 0 VDC | 0 VDC |
| 1782119804 | 190 Count | 758 Count | 36 Count | 0 VDC | 0 VDC |
| 1782118604 | 189 Count | 753 Count | 36 Count | 0 VDC | 0 VDC |
| 1782117403 | 188 Count | 750 Count | 36 Count | 0 VDC | 0 VDC |
| 1782116202 | 187 Count | 744 Count | 36 Count | 0 VDC | 0 VDC |
| 1782115002 | 186 Count | 739 Count | 36 Count | 0 VDC | 0 VDC |
| 1782113801 | 185 Count | 736 Count | 36 Count | 0 VDC | 0 VDC |
| 1782112600 | 184 Count | 733 Count | 36 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)