This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766171584 | 734 Count | 917 Count | 637 Count | 3.58 VDC | 0 VDC |
| 1766169786 | 726 Count | 908 Count | 630 Count | 3.58 VDC | 0 VDC |
| 1766167990 | 719 Count | 900 Count | 624 Count | 3.59 VDC | 0 VDC |
| 1766166193 | 707 Count | 887 Count | 613 Count | 3.59 VDC | 0 VDC |
| 1766164396 | 698 Count | 876 Count | 605 Count | 3.59 VDC | 0 VDC |
| 1766162598 | 689 Count | 865 Count | 597 Count | 3.59 VDC | 0 VDC |
| 1766160802 | 677 Count | 853 Count | 586 Count | 3.59 VDC | 0 VDC |
| 1766159004 | 668 Count | 844 Count | 578 Count | 3.59 VDC | 0 VDC |
| 1766157208 | 659 Count | 835 Count | 570 Count | 3.59 VDC | 0 VDC |
| 1766155411 | 650 Count | 822 Count | 562 Count | 3.59 VDC | 0.62 VDC |
| 1766153614 | 641 Count | 811 Count | 554 Count | 3.61 VDC | 3.86 VDC |
| 1766151817 | 632 Count | 797 Count | 546 Count | 3.61 VDC | 3.88 VDC |
| 1766150018 | 622 Count | 782 Count | 537 Count | 3.61 VDC | 3.86 VDC |
| 1766148222 | 592 Count | 744 Count | 508 Count | 3.62 VDC | 4 VDC |
| 1766146425 | 567 Count | 717 Count | 484 Count | 3.63 VDC | 3.96 VDC |
| 1766144627 | 561 Count | 709 Count | 479 Count | 3.62 VDC | 3.96 VDC |
| 1766142831 | 555 Count | 703 Count | 474 Count | 3.62 VDC | 3.98 VDC |
| 1766141036 | 548 Count | 695 Count | 468 Count | 3.68 VDC | 4.56 VDC |
| 1766139239 | 541 Count | 687 Count | 462 Count | 3.64 VDC | 4.44 VDC |
| 1766137441 | 535 Count | 681 Count | 457 Count | 3.58 VDC | 4.3 VDC |
| 1766135645 | 529 Count | 675 Count | 452 Count | 3.52 VDC | 4.14 VDC |
| 1766132052 | 519 Count | 665 Count | 444 Count | 3.31 VDC | 3.68 VDC |
| 1766132042 | 514 Count | 665 Count | 444 Count | 3.31 VDC | 3.68 VDC |
| 1766130247 | 508 Count | 658 Count | 439 Count | 3.12 VDC | 3.72 VDC |
| 1766128449 | 501 Count | 650 Count | 433 Count | 3.03 VDC | 2.96 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)