This is the latest recevied telemetry packets stored in our database for station/object MB7ULR. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781783430 | 82 Count | 120 Count | 77 Count | 4.13 VDC | 0.14 VDC |
| 1781781929 | 62 Count | 100 Count | 61 Count | 4.17 VDC | 0.14 VDC |
| 1781780428 | 919 Count | 1008 Count | 516 Count | 4.18 VDC | 0.14 VDC |
| 1781778928 | 901 Count | 974 Count | 500 Count | 4.07 VDC | 0.14 VDC |
| 1781777427 | 896 Count | 970 Count | 499 Count | 4.17 VDC | 0.14 VDC |
| 1781775926 | 823 Count | 867 Count | 429 Count | 4.15 VDC | 0.14 VDC |
| 1781774426 | 808 Count | 851 Count | 417 Count | 4.1 VDC | 0.14 VDC |
| 1781772925 | 804 Count | 847 Count | 416 Count | 4.11 VDC | 0.16 VDC |
| 1781771425 | 800 Count | 844 Count | 416 Count | 4.17 VDC | 0.16 VDC |
| 1781769924 | 796 Count | 842 Count | 415 Count | 4.09 VDC | 0.16 VDC |
| 1781768423 | 791 Count | 838 Count | 414 Count | 4.17 VDC | 0.16 VDC |
| 1781766923 | 787 Count | 835 Count | 414 Count | 4.13 VDC | 0.16 VDC |
| 1781765422 | 783 Count | 832 Count | 413 Count | 4.18 VDC | 0.16 VDC |
| 1781763921 | 779 Count | 828 Count | 412 Count | 4.17 VDC | 0.14 VDC |
| 1781762420 | 774 Count | 824 Count | 411 Count | 4.06 VDC | 0.16 VDC |
| 1781760920 | 770 Count | 821 Count | 410 Count | 4.18 VDC | 0.16 VDC |
| 1781759419 | 765 Count | 817 Count | 409 Count | 4.08 VDC | 0.16 VDC |
| 1781757918 | 761 Count | 814 Count | 409 Count | 4.08 VDC | 0.16 VDC |
| 1781756418 | 757 Count | 811 Count | 408 Count | 4.13 VDC | 0.14 VDC |
| 1781754917 | 753 Count | 808 Count | 407 Count | 4.18 VDC | 0.16 VDC |
| 1781753416 | 748 Count | 805 Count | 406 Count | 4.07 VDC | 0.16 VDC |
| 1781751916 | 744 Count | 802 Count | 405 Count | 4.09 VDC | 0.14 VDC |
| 1781750415 | 739 Count | 798 Count | 404 Count | 4.07 VDC | 0.16 VDC |
| 1781748915 | 735 Count | 795 Count | 404 Count | 4.17 VDC | 0.16 VDC |
| 1781747414 | 731 Count | 792 Count | 403 Count | 4.18 VDC | 0.16 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)