This is the latest recevied telemetry packets stored in our database for station/object SQ8PDY-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769798123 | 149 Count | 275 Count | 142 Count | 0 VDC | 0 VDC |
| 1769796323 | 133 Count | 247 Count | 127 Count | 0 VDC | 0 VDC |
| 1769794522 | 115 Count | 208 Count | 110 Count | 0 VDC | 0 VDC |
| 1769792722 | 98 Count | 183 Count | 94 Count | 0 VDC | 0 VDC |
| 1769790921 | 73 Count | 141 Count | 70 Count | 0 VDC | 0 VDC |
| 1769789120 | 56 Count | 105 Count | 54 Count | 0 VDC | 0 VDC |
| 1769787320 | 32 Count | 60 Count | 31 Count | 0 VDC | 0 VDC |
| 1769785519 | 16 Count | 28 Count | 16 Count | 0 VDC | 0 VDC |
| 1769781918 | 529 Count | 973 Count | 497 Count | 0 VDC | 0 VDC |
| 1769780117 | 505 Count | 896 Count | 474 Count | 0 VDC | 0 VDC |
| 1769778316 | 494 Count | 852 Count | 464 Count | 0 VDC | 0 VDC |
| 1769776522 | 487 Count | 844 Count | 462 Count | 0 VDC | 0 VDC |
| 1769774721 | 479 Count | 827 Count | 455 Count | 0 VDC | 0 VDC |
| 1769772921 | 459 Count | 786 Count | 436 Count | 0 VDC | 0 VDC |
| 1769771120 | 417 Count | 687 Count | 395 Count | 0 VDC | 0 VDC |
| 1769769319 | 396 Count | 655 Count | 375 Count | 0 VDC | 0 VDC |
| 1769767519 | 381 Count | 631 Count | 361 Count | 0 VDC | 0 VDC |
| 1769765718 | 360 Count | 587 Count | 341 Count | 0 VDC | 0 VDC |
| 1769763918 | 341 Count | 557 Count | 323 Count | 0 VDC | 0 VDC |
| 1769762117 | 317 Count | 518 Count | 300 Count | 0 VDC | 0 VDC |
| 1769756715 | 266 Count | 427 Count | 252 Count | 0 VDC | 0 VDC |
| 1769754920 | 240 Count | 386 Count | 231 Count | 0 VDC | 0 VDC |
| 1769753120 | 221 Count | 353 Count | 213 Count | 0 VDC | 0 VDC |
| 1769751319 | 197 Count | 320 Count | 190 Count | 0 VDC | 0 VDC |
| 1769749519 | 165 Count | 278 Count | 159 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)