This is the latest recevied telemetry packets stored in our database for station/object SQ1BHQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762714887 | 82 Count | 239 Count | 68 Count | 4.31 VDC | 0.14 VDC |
| 1762713084 | 76 Count | 223 Count | 63 Count | 4.29 VDC | 0.14 VDC |
| 1762711281 | 73 Count | 214 Count | 61 Count | 4.31 VDC | 0.14 VDC |
| 1762709511 | 70 Count | 206 Count | 59 Count | 4.31 VDC | 0.14 VDC |
| 1762707708 | 67 Count | 196 Count | 57 Count | 4.24 VDC | 0.14 VDC |
| 1762705906 | 64 Count | 186 Count | 55 Count | 4.25 VDC | 0.14 VDC |
| 1762704103 | 61 Count | 176 Count | 53 Count | 4.26 VDC | 0.14 VDC |
| 1762702300 | 58 Count | 167 Count | 51 Count | 4.23 VDC | 0.14 VDC |
| 1762700497 | 55 Count | 156 Count | 49 Count | 4.24 VDC | 0.14 VDC |
| 1762698695 | 52 Count | 146 Count | 47 Count | 4.26 VDC | 0.14 VDC |
| 1762696892 | 49 Count | 110 Count | 45 Count | 4.26 VDC | 0.14 VDC |
| 1762695089 | 46 Count | 100 Count | 43 Count | 4.26 VDC | 0.14 VDC |
| 1762693286 | 35 Count | 75 Count | 33 Count | 4.27 VDC | 0.14 VDC |
| 1762691484 | 20 Count | 48 Count | 19 Count | 4.28 VDC | 0.14 VDC |
| 1762689681 | 11 Count | 27 Count | 11 Count | 4.3 VDC | 0.14 VDC |
| 1762687912 | 574 Count | 1017 Count | 441 Count | 4.23 VDC | 0.14 VDC |
| 1762686109 | 564 Count | 995 Count | 432 Count | 4.31 VDC | 0.14 VDC |
| 1762684306 | 553 Count | 972 Count | 422 Count | 4.28 VDC | 0.14 VDC |
| 1762682503 | 550 Count | 954 Count | 420 Count | 4.24 VDC | 0.14 VDC |
| 1762680701 | 547 Count | 944 Count | 418 Count | 4.3 VDC | 0.14 VDC |
| 1762678898 | 544 Count | 935 Count | 416 Count | 4.23 VDC | 0.14 VDC |
| 1762677095 | 541 Count | 926 Count | 414 Count | 4.26 VDC | 0.14 VDC |
| 1762675292 | 538 Count | 918 Count | 412 Count | 4.28 VDC | 0.14 VDC |
| 1762673489 | 535 Count | 915 Count | 410 Count | 4.23 VDC | 0.14 VDC |
| 1762671687 | 532 Count | 910 Count | 408 Count | 4.26 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)