This is the latest recevied telemetry packets stored in our database for station/object SR8MBR-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781773585 | 63 Count | 101 Count | 62 Count | 0 VDC | 0 VDC |
| 1781771784 | 30 Count | 51 Count | 30 Count | 0 VDC | 0 VDC |
| 1781768183 | 503 Count | 983 Count | 479 Count | 0 VDC | 0 VDC |
| 1781767663 | 498 Count | 983 Count | 479 Count | 0 VDC | 0 VDC |
| 1781764062 | 457 Count | 916 Count | 440 Count | 0 VDC | 0 VDC |
| 1781762261 | 433 Count | 866 Count | 417 Count | 0 VDC | 0 VDC |
| 1781760461 | 392 Count | 785 Count | 377 Count | 0 VDC | 0 VDC |
| 1781758660 | 370 Count | 740 Count | 356 Count | 0 VDC | 0 VDC |
| 1781756859 | 344 Count | 682 Count | 331 Count | 0 VDC | 0 VDC |
| 1781753258 | 294 Count | 579 Count | 283 Count | 0 VDC | 0 VDC |
| 1781751457 | 274 Count | 536 Count | 264 Count | 0 VDC | 0 VDC |
| 1781749663 | 171 Count | 365 Count | 166 Count | 0 VDC | 0 VDC |
| 1781747863 | 115 Count | 248 Count | 111 Count | 0 VDC | 0 VDC |
| 1781746062 | 91 Count | 196 Count | 88 Count | 0 VDC | 0 VDC |
| 1781744261 | 69 Count | 152 Count | 67 Count | 0 VDC | 0 VDC |
| 1781742461 | 46 Count | 101 Count | 45 Count | 0 VDC | 0 VDC |
| 1781740660 | 22 Count | 51 Count | 22 Count | 0 VDC | 0 VDC |
| 1781738860 | 534 Count | 1007 Count | 503 Count | 0 VDC | 0 VDC |
| 1781737059 | 516 Count | 968 Count | 486 Count | 0 VDC | 0 VDC |
| 1781733457 | 440 Count | 832 Count | 412 Count | 0 VDC | 0 VDC |
| 1781731656 | 423 Count | 797 Count | 396 Count | 0 VDC | 0 VDC |
| 1781729855 | 406 Count | 758 Count | 380 Count | 0 VDC | 0 VDC |
| 1781728220 | 401 Count | 757 Count | 380 Count | 0 VDC | 0 VDC |
| 1781722828 | 295 Count | 567 Count | 277 Count | 0 VDC | 0 VDC |
| 1781721018 | 263 Count | 508 Count | 246 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)