This is the latest recevied telemetry packets stored in our database for station/object SP3KON-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1768497359 | 180 Count | 677 Count | 119 Count | 0 VDC | 0 VDC |
| 1768496458 | 178 Count | 673 Count | 118 Count | 0 VDC | 0 VDC |
| 1768495557 | 176 Count | 668 Count | 117 Count | 0 VDC | 0 VDC |
| 1768494656 | 173 Count | 664 Count | 115 Count | 0 VDC | 0 VDC |
| 1768493754 | 171 Count | 659 Count | 114 Count | 0 VDC | 0 VDC |
| 1768492853 | 168 Count | 653 Count | 112 Count | 0 VDC | 0 VDC |
| 1768491952 | 166 Count | 650 Count | 111 Count | 0 VDC | 0 VDC |
| 1768491051 | 164 Count | 647 Count | 110 Count | 0 VDC | 0 VDC |
| 1768490150 | 162 Count | 643 Count | 109 Count | 0 VDC | 0 VDC |
| 1768489250 | 161 Count | 639 Count | 109 Count | 0 VDC | 0 VDC |
| 1768488349 | 159 Count | 634 Count | 108 Count | 0 VDC | 0 VDC |
| 1768487448 | 156 Count | 629 Count | 106 Count | 0 VDC | 0 VDC |
| 1768486547 | 154 Count | 619 Count | 105 Count | 0 VDC | 0 VDC |
| 1768485646 | 151 Count | 607 Count | 103 Count | 0 VDC | 0 VDC |
| 1768484745 | 147 Count | 591 Count | 100 Count | 0 VDC | 0 VDC |
| 1768483844 | 144 Count | 579 Count | 98 Count | 0 VDC | 0 VDC |
| 1768482943 | 141 Count | 566 Count | 96 Count | 0 VDC | 0 VDC |
| 1768482042 | 138 Count | 554 Count | 94 Count | 0 VDC | 0 VDC |
| 1768481141 | 135 Count | 542 Count | 92 Count | 0 VDC | 0 VDC |
| 1768480240 | 133 Count | 531 Count | 91 Count | 0 VDC | 0 VDC |
| 1768479340 | 129 Count | 517 Count | 88 Count | 0 VDC | 0 VDC |
| 1768478439 | 126 Count | 506 Count | 86 Count | 0 VDC | 0 VDC |
| 1768477538 | 122 Count | 489 Count | 83 Count | 0 VDC | 0 VDC |
| 1768476637 | 118 Count | 475 Count | 80 Count | 0 VDC | 0 VDC |
| 1768475758 | 115 Count | 462 Count | 78 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)