This is the latest recevied telemetry packets stored in our database for station/object SP2RO-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1768443327 | 197 Count | 1015 Count | 158 Count | 1.63 VDC | 0 VDC |
| 1768442427 | 191 Count | 991 Count | 153 Count | 1.52 VDC | 0 VDC |
| 1768441526 | 186 Count | 964 Count | 149 Count | 1.41 VDC | 0 VDC |
| 1768440625 | 179 Count | 932 Count | 143 Count | 1.51 VDC | 0 VDC |
| 1768439724 | 175 Count | 905 Count | 140 Count | 1.45 VDC | 0 VDC |
| 1768438823 | 169 Count | 879 Count | 135 Count | 1.54 VDC | 0 VDC |
| 1768437922 | 165 Count | 852 Count | 132 Count | 1.36 VDC | 0 VDC |
| 1768437021 | 158 Count | 825 Count | 126 Count | 1.33 VDC | 0 VDC |
| 1768436120 | 154 Count | 785 Count | 123 Count | 1.41 VDC | 0 VDC |
| 1768415436 | 21 Count | 123 Count | 18 Count | 1.38 VDC | 0 VDC |
| 1768414535 | 16 Count | 83 Count | 14 Count | 1.4 VDC | 0 VDC |
| 1768413634 | 10 Count | 58 Count | 9 Count | 1.41 VDC | 0 VDC |
| 1768412733 | 5 Count | 28 Count | 5 Count | 1.29 VDC | 0 VDC |
| 1768411833 | 217 Count | 1033 Count | 189 Count | 1.27 VDC | 0 VDC |
| 1768410932 | 213 Count | 999 Count | 186 Count | 1.25 VDC | 0 VDC |
| 1768410031 | 206 Count | 973 Count | 180 Count | 1.33 VDC | 0 VDC |
| 1768409130 | 201 Count | 943 Count | 176 Count | 1.23 VDC | 0 VDC |
| 1768408229 | 195 Count | 916 Count | 171 Count | 1.2 VDC | 0 VDC |
| 1768407329 | 191 Count | 884 Count | 168 Count | 1.42 VDC | 0 VDC |
| 1768406428 | 185 Count | 861 Count | 163 Count | 1.32 VDC | 0 VDC |
| 1768405527 | 180 Count | 823 Count | 159 Count | 1.45 VDC | 0 VDC |
| 1768404626 | 172 Count | 782 Count | 152 Count | 1.42 VDC | 0 VDC |
| 1768403726 | 155 Count | 731 Count | 136 Count | 1.44 VDC | 0 VDC |
| 1768402825 | 148 Count | 694 Count | 131 Count | 1.42 VDC | 0 VDC |
| 1768401924 | 143 Count | 659 Count | 127 Count | 1.41 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)