This is the latest recevied telemetry packets stored in our database for station/object SP9DAT-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1744951641 | 351 Count | 533 Count | 292 Count | 0 VDC | 0 VDC |
| 1744950740 | 346 Count | 523 Count | 288 Count | 0 VDC | 0 VDC |
| 1744949840 | 337 Count | 510 Count | 280 Count | 0 VDC | 0 VDC |
| 1744948939 | 333 Count | 502 Count | 277 Count | 0 VDC | 0 VDC |
| 1744948038 | 320 Count | 485 Count | 265 Count | 0 VDC | 0 VDC |
| 1744947137 | 315 Count | 474 Count | 261 Count | 0 VDC | 0 VDC |
| 1744946236 | 306 Count | 452 Count | 253 Count | 0 VDC | 0 VDC |
| 1744945335 | 301 Count | 435 Count | 249 Count | 0 VDC | 0 VDC |
| 1744944434 | 293 Count | 423 Count | 242 Count | 0 VDC | 0 VDC |
| 1744943533 | 289 Count | 413 Count | 239 Count | 0 VDC | 0 VDC |
| 1744942632 | 281 Count | 400 Count | 232 Count | 0 VDC | 0 VDC |
| 1744941731 | 277 Count | 394 Count | 229 Count | 0 VDC | 0 VDC |
| 1744940830 | 269 Count | 381 Count | 222 Count | 0 VDC | 0 VDC |
| 1744939930 | 265 Count | 375 Count | 219 Count | 0 VDC | 0 VDC |
| 1744939029 | 257 Count | 363 Count | 212 Count | 0 VDC | 0 VDC |
| 1744938128 | 253 Count | 356 Count | 209 Count | 0 VDC | 0 VDC |
| 1744937227 | 245 Count | 343 Count | 202 Count | 0 VDC | 0 VDC |
| 1744936326 | 241 Count | 337 Count | 199 Count | 0 VDC | 0 VDC |
| 1744935426 | 233 Count | 325 Count | 192 Count | 0 VDC | 0 VDC |
| 1744934524 | 229 Count | 318 Count | 189 Count | 0 VDC | 0 VDC |
| 1744933623 | 222 Count | 308 Count | 183 Count | 0 VDC | 0 VDC |
| 1744932722 | 217 Count | 299 Count | 179 Count | 0 VDC | 0 VDC |
| 1744931821 | 209 Count | 288 Count | 172 Count | 0 VDC | 0 VDC |
| 1744930921 | 206 Count | 282 Count | 170 Count | 0 VDC | 0 VDC |
| 1744930020 | 198 Count | 270 Count | 163 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)