This is the latest recevied telemetry packets stored in our database for station/object DG4CB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1772454392 | 684 Count | 641 Count | 0 Count | 0 VDC | 0 VDC |
| 1772452589 | 683 Count | 640 Count | 0 Count | 0 VDC | 0 VDC |
| 1772448982 | 681 Count | 638 Count | 0 Count | 0 VDC | 0 VDC |
| 1772447179 | 680 Count | 637 Count | 0 Count | 0 VDC | 0 VDC |
| 1772445376 | 679 Count | 636 Count | 0 Count | 0 VDC | 0 VDC |
| 1772443572 | 678 Count | 634 Count | 0 Count | 0 VDC | 0 VDC |
| 1772441769 | 677 Count | 633 Count | 0 Count | 0 VDC | 0 VDC |
| 1772439966 | 676 Count | 632 Count | 0 Count | 0 VDC | 0 VDC |
| 1772438163 | 675 Count | 631 Count | 0 Count | 0 VDC | 0 VDC |
| 1772432753 | 672 Count | 628 Count | 0 Count | 0 VDC | 0 VDC |
| 1772430950 | 671 Count | 627 Count | 0 Count | 0 VDC | 0 VDC |
| 1772429147 | 670 Count | 626 Count | 0 Count | 0 VDC | 0 VDC |
| 1772427344 | 669 Count | 625 Count | 0 Count | 0 VDC | 0 VDC |
| 1772425541 | 668 Count | 624 Count | 0 Count | 0 VDC | 0 VDC |
| 1772420132 | 665 Count | 621 Count | 0 Count | 0 VDC | 0 VDC |
| 1772418329 | 664 Count | 620 Count | 0 Count | 0 VDC | 0 VDC |
| 1772411116 | 660 Count | 616 Count | 0 Count | 0 VDC | 0 VDC |
| 1772409313 | 659 Count | 615 Count | 0 Count | 0 VDC | 0 VDC |
| 1772407509 | 658 Count | 614 Count | 0 Count | 0 VDC | 0 VDC |
| 1772405705 | 657 Count | 613 Count | 0 Count | 0 VDC | 0 VDC |
| 1772403902 | 656 Count | 612 Count | 0 Count | 0 VDC | 0 VDC |
| 1772402099 | 655 Count | 611 Count | 0 Count | 0 VDC | 0 VDC |
| 1772400295 | 654 Count | 610 Count | 0 Count | 0 VDC | 0 VDC |
| 1772398492 | 653 Count | 609 Count | 0 Count | 0 VDC | 0 VDC |
| 1772396689 | 652 Count | 608 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)