This is the latest recevied telemetry packets stored in our database for station/object SP2PA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1760830060 | 388 Count | 929 Count | 106 Count | 0 VDC | 0 VDC |
| 1760828259 | 387 Count | 926 Count | 106 Count | 0 VDC | 0 VDC |
| 1760826458 | 386 Count | 924 Count | 106 Count | 0 VDC | 0 VDC |
| 1760824672 | 385 Count | 922 Count | 106 Count | 0 VDC | 0 VDC |
| 1760822871 | 384 Count | 915 Count | 106 Count | 0 VDC | 0 VDC |
| 1760821070 | 383 Count | 913 Count | 106 Count | 0 VDC | 0 VDC |
| 1760819269 | 382 Count | 911 Count | 106 Count | 0 VDC | 0 VDC |
| 1760817468 | 381 Count | 909 Count | 106 Count | 0 VDC | 0 VDC |
| 1760815667 | 380 Count | 907 Count | 106 Count | 0 VDC | 0 VDC |
| 1760813866 | 379 Count | 905 Count | 106 Count | 0 VDC | 0 VDC |
| 1760812065 | 378 Count | 904 Count | 106 Count | 0 VDC | 0 VDC |
| 1760810264 | 377 Count | 902 Count | 106 Count | 0 VDC | 0 VDC |
| 1760808463 | 376 Count | 900 Count | 106 Count | 0 VDC | 0 VDC |
| 1760806662 | 375 Count | 898 Count | 106 Count | 0 VDC | 0 VDC |
| 1760804861 | 374 Count | 896 Count | 106 Count | 0 VDC | 0 VDC |
| 1760804732 | 373 Count | 896 Count | 106 Count | 0 VDC | 0 VDC |
| 1760802930 | 372 Count | 895 Count | 106 Count | 0 VDC | 0 VDC |
| 1760801141 | 371 Count | 888 Count | 106 Count | 0 VDC | 0 VDC |
| 1760799340 | 370 Count | 886 Count | 106 Count | 0 VDC | 0 VDC |
| 1760797539 | 369 Count | 885 Count | 106 Count | 0 VDC | 0 VDC |
| 1760795737 | 368 Count | 884 Count | 106 Count | 0 VDC | 0 VDC |
| 1760793936 | 367 Count | 883 Count | 106 Count | 0 VDC | 0 VDC |
| 1760792136 | 366 Count | 881 Count | 106 Count | 0 VDC | 0 VDC |
| 1760790334 | 365 Count | 881 Count | 106 Count | 0 VDC | 0 VDC |
| 1760788533 | 364 Count | 880 Count | 106 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)