This is the latest recevied telemetry packets stored in our database for station/object GM4HYG-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774191439 | 33 Count | 15 Count | 15 Count | 0 VDC | 0 VDC |
| 1774190536 | 31 Count | 14 Count | 14 Count | 0 VDC | 0 VDC |
| 1774189633 | 29 Count | 13 Count | 13 Count | 0 VDC | 0 VDC |
| 1774188727 | 27 Count | 12 Count | 12 Count | 0 VDC | 0 VDC |
| 1774187824 | 25 Count | 11 Count | 11 Count | 0 VDC | 0 VDC |
| 1774187004 | 19 Count | 10 Count | 10 Count | 0 VDC | 0 VDC |
| 1774186101 | 17 Count | 9 Count | 9 Count | 0 VDC | 0 VDC |
| 1774185197 | 15 Count | 8 Count | 8 Count | 0 VDC | 0 VDC |
| 1774184294 | 13 Count | 7 Count | 7 Count | 0 VDC | 0 VDC |
| 1774183390 | 11 Count | 6 Count | 6 Count | 0 VDC | 0 VDC |
| 1774182486 | 9 Count | 5 Count | 5 Count | 0 VDC | 0 VDC |
| 1774181582 | 7 Count | 4 Count | 4 Count | 0 VDC | 0 VDC |
| 1774180679 | 5 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1774178872 | 1 Count | 1 Count | 1 Count | 0 VDC | 0 VDC |
| 1774177968 | 1000 Count | 835 Count | 612 Count | 0 VDC | 0 VDC |
| 1774177065 | 998 Count | 834 Count | 611 Count | 0 VDC | 0 VDC |
| 1774176161 | 996 Count | 833 Count | 610 Count | 0 VDC | 0 VDC |
| 1774174355 | 992 Count | 831 Count | 608 Count | 0 VDC | 0 VDC |
| 1774172548 | 988 Count | 829 Count | 606 Count | 0 VDC | 0 VDC |
| 1774170740 | 984 Count | 827 Count | 604 Count | 0 VDC | 0 VDC |
| 1774169837 | 982 Count | 826 Count | 603 Count | 0 VDC | 0 VDC |
| 1774165401 | 968 Count | 817 Count | 598 Count | 0 VDC | 0 VDC |
| 1774164498 | 966 Count | 815 Count | 597 Count | 0 VDC | 0 VDC |
| 1774163594 | 964 Count | 813 Count | 596 Count | 0 VDC | 0 VDC |
| 1774162691 | 962 Count | 811 Count | 595 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)