This is the latest recevied telemetry packets stored in our database for station/object 4K6EH-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774357189 | 804 Count | 804 Count | 230 Count | 0 VDC | 0 VDC |
| 1774356286 | 803 Count | 804 Count | 230 Count | 0 VDC | 0 VDC |
| 1774355382 | 802 Count | 803 Count | 230 Count | 0 VDC | 0 VDC |
| 1774354479 | 801 Count | 802 Count | 230 Count | 0 VDC | 0 VDC |
| 1774353575 | 800 Count | 801 Count | 230 Count | 0 VDC | 0 VDC |
| 1774352672 | 798 Count | 800 Count | 229 Count | 0 VDC | 0 VDC |
| 1774351769 | 797 Count | 800 Count | 229 Count | 0 VDC | 0 VDC |
| 1774350865 | 796 Count | 800 Count | 229 Count | 0 VDC | 0 VDC |
| 1774349961 | 795 Count | 800 Count | 229 Count | 0 VDC | 0 VDC |
| 1774349058 | 792 Count | 798 Count | 227 Count | 0 VDC | 0 VDC |
| 1774348155 | 790 Count | 797 Count | 226 Count | 0 VDC | 0 VDC |
| 1774347251 | 788 Count | 795 Count | 225 Count | 0 VDC | 0 VDC |
| 1774346348 | 786 Count | 793 Count | 224 Count | 0 VDC | 0 VDC |
| 1774345444 | 785 Count | 792 Count | 224 Count | 0 VDC | 0 VDC |
| 1774344540 | 784 Count | 791 Count | 224 Count | 0 VDC | 0 VDC |
| 1774343637 | 783 Count | 791 Count | 224 Count | 0 VDC | 0 VDC |
| 1774342733 | 782 Count | 791 Count | 224 Count | 0 VDC | 0 VDC |
| 1774341830 | 781 Count | 790 Count | 224 Count | 0 VDC | 0 VDC |
| 1774340926 | 780 Count | 787 Count | 224 Count | 0 VDC | 0 VDC |
| 1774340105 | 778 Count | 785 Count | 223 Count | 0 VDC | 0 VDC |
| 1774339202 | 776 Count | 783 Count | 222 Count | 0 VDC | 0 VDC |
| 1774338298 | 775 Count | 782 Count | 222 Count | 0 VDC | 0 VDC |
| 1774337395 | 773 Count | 780 Count | 221 Count | 0 VDC | 0 VDC |
| 1774336492 | 772 Count | 780 Count | 221 Count | 0 VDC | 0 VDC |
| 1774335588 | 771 Count | 779 Count | 221 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)