This is the latest recevied telemetry packets stored in our database for station/object SO9G-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781858704 | 43 Count | 978 Count | 28 Count | 0 VDC | 0 VDC |
| 1781856904 | 41 Count | 923 Count | 27 Count | 0 VDC | 0 VDC |
| 1781855103 | 37 Count | 849 Count | 24 Count | 0 VDC | 0 VDC |
| 1781853302 | 36 Count | 775 Count | 24 Count | 0 VDC | 0 VDC |
| 1781851502 | 34 Count | 693 Count | 23 Count | 0 VDC | 0 VDC |
| 1781849701 | 31 Count | 635 Count | 21 Count | 0 VDC | 0 VDC |
| 1781847901 | 28 Count | 584 Count | 19 Count | 0 VDC | 0 VDC |
| 1781846101 | 26 Count | 531 Count | 18 Count | 0 VDC | 0 VDC |
| 1781844302 | 23 Count | 473 Count | 16 Count | 0 VDC | 0 VDC |
| 1781842502 | 20 Count | 409 Count | 14 Count | 0 VDC | 0 VDC |
| 1781840701 | 17 Count | 352 Count | 12 Count | 0 VDC | 0 VDC |
| 1781838901 | 14 Count | 298 Count | 10 Count | 0 VDC | 0 VDC |
| 1781837100 | 11 Count | 248 Count | 8 Count | 0 VDC | 0 VDC |
| 1781835299 | 8 Count | 185 Count | 6 Count | 0 VDC | 0 VDC |
| 1781833499 | 5 Count | 132 Count | 4 Count | 0 VDC | 0 VDC |
| 1781831698 | 2 Count | 65 Count | 2 Count | 0 VDC | 0 VDC |
| 1781829898 | 32 Count | 1013 Count | 17 Count | 0 VDC | 0 VDC |
| 1781828097 | 30 Count | 941 Count | 16 Count | 0 VDC | 0 VDC |
| 1781826297 | 28 Count | 881 Count | 15 Count | 0 VDC | 0 VDC |
| 1781824496 | 26 Count | 826 Count | 14 Count | 0 VDC | 0 VDC |
| 1781822701 | 25 Count | 761 Count | 14 Count | 0 VDC | 0 VDC |
| 1781820901 | 23 Count | 702 Count | 13 Count | 0 VDC | 0 VDC |
| 1781819100 | 21 Count | 635 Count | 12 Count | 0 VDC | 0 VDC |
| 1781817299 | 19 Count | 568 Count | 11 Count | 0 VDC | 0 VDC |
| 1781815499 | 17 Count | 491 Count | 10 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)