This is the latest recevied telemetry packets stored in our database for station/object SP9DAT-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1744946440 | 218 Count | 329 Count | 141 Count | 0 VDC | 0 VDC |
| 1744945539 | 211 Count | 306 Count | 136 Count | 0 VDC | 0 VDC |
| 1744944638 | 205 Count | 297 Count | 133 Count | 0 VDC | 0 VDC |
| 1744943737 | 198 Count | 284 Count | 128 Count | 0 VDC | 0 VDC |
| 1744942836 | 191 Count | 271 Count | 124 Count | 0 VDC | 0 VDC |
| 1744941935 | 185 Count | 262 Count | 120 Count | 0 VDC | 0 VDC |
| 1744941034 | 178 Count | 250 Count | 116 Count | 0 VDC | 0 VDC |
| 1744940133 | 172 Count | 240 Count | 112 Count | 0 VDC | 0 VDC |
| 1744939232 | 165 Count | 230 Count | 108 Count | 0 VDC | 0 VDC |
| 1744938331 | 159 Count | 219 Count | 104 Count | 0 VDC | 0 VDC |
| 1744937430 | 152 Count | 209 Count | 100 Count | 0 VDC | 0 VDC |
| 1744936529 | 146 Count | 199 Count | 96 Count | 0 VDC | 0 VDC |
| 1744935629 | 141 Count | 192 Count | 93 Count | 0 VDC | 0 VDC |
| 1744934728 | 135 Count | 181 Count | 89 Count | 0 VDC | 0 VDC |
| 1744933827 | 128 Count | 172 Count | 85 Count | 0 VDC | 0 VDC |
| 1744932926 | 121 Count | 162 Count | 80 Count | 0 VDC | 0 VDC |
| 1744932025 | 114 Count | 153 Count | 76 Count | 0 VDC | 0 VDC |
| 1744931124 | 110 Count | 145 Count | 73 Count | 0 VDC | 0 VDC |
| 1744930223 | 102 Count | 134 Count | 68 Count | 0 VDC | 0 VDC |
| 1744929322 | 96 Count | 125 Count | 64 Count | 0 VDC | 0 VDC |
| 1744928421 | 89 Count | 115 Count | 60 Count | 0 VDC | 0 VDC |
| 1744927521 | 83 Count | 108 Count | 56 Count | 0 VDC | 0 VDC |
| 1744926620 | 76 Count | 97 Count | 52 Count | 0 VDC | 0 VDC |
| 1744925811 | 65 Count | 84 Count | 43 Count | 0 VDC | 0 VDC |
| 1744924910 | 60 Count | 78 Count | 40 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)