This is the latest recevied telemetry packets stored in our database for station/object F4JTC-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1772462049 | 434 Count | 685 Count | 286 Count | 0 VDC | 0 VDC |
| 1772461746 | 432 Count | 683 Count | 285 Count | 0 VDC | 0 VDC |
| 1772461442 | 430 Count | 680 Count | 284 Count | 0 VDC | 0 VDC |
| 1772461138 | 427 Count | 676 Count | 282 Count | 0 VDC | 0 VDC |
| 1772460834 | 424 Count | 672 Count | 280 Count | 0 VDC | 0 VDC |
| 1772460531 | 422 Count | 670 Count | 279 Count | 0 VDC | 0 VDC |
| 1772459923 | 415 Count | 663 Count | 274 Count | 0 VDC | 0 VDC |
| 1772459615 | 412 Count | 659 Count | 272 Count | 0 VDC | 0 VDC |
| 1772458400 | 402 Count | 648 Count | 266 Count | 0 VDC | 0 VDC |
| 1772458097 | 399 Count | 644 Count | 264 Count | 0 VDC | 0 VDC |
| 1772457793 | 398 Count | 639 Count | 264 Count | 0 VDC | 0 VDC |
| 1772457489 | 394 Count | 634 Count | 261 Count | 0 VDC | 0 VDC |
| 1772457186 | 393 Count | 631 Count | 261 Count | 0 VDC | 0 VDC |
| 1772456882 | 390 Count | 627 Count | 259 Count | 0 VDC | 0 VDC |
| 1772456578 | 387 Count | 623 Count | 257 Count | 0 VDC | 0 VDC |
| 1772456274 | 385 Count | 621 Count | 256 Count | 0 VDC | 0 VDC |
| 1772455971 | 384 Count | 619 Count | 256 Count | 0 VDC | 0 VDC |
| 1772455667 | 379 Count | 613 Count | 252 Count | 0 VDC | 0 VDC |
| 1772455363 | 374 Count | 603 Count | 249 Count | 0 VDC | 0 VDC |
| 1772455060 | 370 Count | 596 Count | 246 Count | 0 VDC | 0 VDC |
| 1772454755 | 367 Count | 591 Count | 244 Count | 0 VDC | 0 VDC |
| 1772454452 | 363 Count | 587 Count | 241 Count | 0 VDC | 0 VDC |
| 1772454148 | 359 Count | 582 Count | 238 Count | 0 VDC | 0 VDC |
| 1772453844 | 356 Count | 569 Count | 236 Count | 0 VDC | 0 VDC |
| 1772453541 | 353 Count | 561 Count | 234 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)