This is the latest recevied telemetry packets stored in our database for station/object SP2SGK-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1772444886 | 356 Count | 409 Count | 178 Count | 0 VDC | 0 VDC |
| 1772443983 | 355 Count | 408 Count | 178 Count | 0 VDC | 0 VDC |
| 1772443080 | 353 Count | 406 Count | 177 Count | 0 VDC | 0 VDC |
| 1772442177 | 351 Count | 404 Count | 176 Count | 0 VDC | 0 VDC |
| 1772441274 | 349 Count | 402 Count | 175 Count | 0 VDC | 0 VDC |
| 1772440371 | 347 Count | 400 Count | 174 Count | 0 VDC | 0 VDC |
| 1772439468 | 345 Count | 398 Count | 173 Count | 0 VDC | 0 VDC |
| 1772438565 | 343 Count | 396 Count | 172 Count | 0 VDC | 0 VDC |
| 1772437662 | 341 Count | 394 Count | 171 Count | 0 VDC | 0 VDC |
| 1772436758 | 339 Count | 392 Count | 170 Count | 0 VDC | 0 VDC |
| 1772435855 | 337 Count | 390 Count | 169 Count | 0 VDC | 0 VDC |
| 1772434952 | 335 Count | 389 Count | 168 Count | 0 VDC | 0 VDC |
| 1772434049 | 333 Count | 387 Count | 167 Count | 0 VDC | 0 VDC |
| 1772433146 | 331 Count | 385 Count | 166 Count | 0 VDC | 0 VDC |
| 1772432243 | 329 Count | 383 Count | 165 Count | 0 VDC | 0 VDC |
| 1772431412 | 327 Count | 381 Count | 164 Count | 0 VDC | 0 VDC |
| 1772430509 | 325 Count | 379 Count | 163 Count | 0 VDC | 0 VDC |
| 1772429606 | 323 Count | 377 Count | 162 Count | 0 VDC | 0 VDC |
| 1772428703 | 321 Count | 375 Count | 161 Count | 0 VDC | 0 VDC |
| 1772427800 | 319 Count | 373 Count | 160 Count | 0 VDC | 0 VDC |
| 1772426897 | 317 Count | 371 Count | 159 Count | 0 VDC | 0 VDC |
| 1772425994 | 315 Count | 369 Count | 158 Count | 0 VDC | 0 VDC |
| 1772425091 | 313 Count | 367 Count | 157 Count | 0 VDC | 0 VDC |
| 1772424188 | 311 Count | 365 Count | 156 Count | 0 VDC | 0 VDC |
| 1772423285 | 309 Count | 363 Count | 155 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)