This is the latest recevied telemetry packets stored in our database for station/object SP9DLM-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766350803 | 367 Count | 277 Count | 235 Count | 0 VDC | 0 VDC |
| 1766348999 | 364 Count | 275 Count | 233 Count | 0 VDC | 0 VDC |
| 1766347196 | 361 Count | 273 Count | 231 Count | 0 VDC | 0 VDC |
| 1766345393 | 358 Count | 271 Count | 229 Count | 0 VDC | 0 VDC |
| 1766343589 | 355 Count | 269 Count | 227 Count | 0 VDC | 0 VDC |
| 1766341786 | 352 Count | 267 Count | 225 Count | 0 VDC | 0 VDC |
| 1766339983 | 345 Count | 261 Count | 219 Count | 0 VDC | 0 VDC |
| 1766338179 | 323 Count | 240 Count | 198 Count | 0 VDC | 0 VDC |
| 1766336376 | 308 Count | 226 Count | 184 Count | 0 VDC | 0 VDC |
| 1766334572 | 303 Count | 222 Count | 180 Count | 0 VDC | 0 VDC |
| 1766333317 | 302 Count | 222 Count | 180 Count | 0 VDC | 0 VDC |
| 1766331513 | 301 Count | 222 Count | 180 Count | 0 VDC | 0 VDC |
| 1766329710 | 300 Count | 222 Count | 180 Count | 0 VDC | 0 VDC |
| 1766327906 | 299 Count | 222 Count | 180 Count | 0 VDC | 0 VDC |
| 1766326103 | 298 Count | 222 Count | 180 Count | 0 VDC | 0 VDC |
| 1766324300 | 297 Count | 222 Count | 180 Count | 0 VDC | 0 VDC |
| 1766322496 | 286 Count | 212 Count | 170 Count | 0 VDC | 0 VDC |
| 1766320693 | 282 Count | 209 Count | 167 Count | 0 VDC | 0 VDC |
| 1766318889 | 281 Count | 209 Count | 167 Count | 0 VDC | 0 VDC |
| 1766317085 | 280 Count | 209 Count | 167 Count | 0 VDC | 0 VDC |
| 1766315282 | 222 Count | 152 Count | 110 Count | 0 VDC | 0 VDC |
| 1766313478 | 216 Count | 147 Count | 105 Count | 0 VDC | 0 VDC |
| 1766312975 | 214 Count | 146 Count | 104 Count | 0 VDC | 0 VDC |
| 1766311899 | 213 Count | 146 Count | 104 Count | 0 VDC | 0 VDC |
| 1766311813 | 212 Count | 146 Count | 104 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)