This is the latest recevied telemetry packets stored in our database for station/object EB5BZM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1756876513 | 14 Count | 418 Count | 0 Count | 0 VDC | 0 VDC |
| 1756874410 | 13 Count | 370 Count | 0 Count | 0 VDC | 0 VDC |
| 1756872307 | 11 Count | 330 Count | 0 Count | 0 VDC | 0 VDC |
| 1756870203 | 9 Count | 286 Count | 0 Count | 0 VDC | 0 VDC |
| 1756868100 | 7 Count | 233 Count | 0 Count | 0 VDC | 0 VDC |
| 1756865996 | 5 Count | 184 Count | 0 Count | 0 VDC | 0 VDC |
| 1756863893 | 3 Count | 130 Count | 0 Count | 0 VDC | 0 VDC |
| 1756861790 | 1 Count | 85 Count | 0 Count | 0 VDC | 0 VDC |
| 1756859687 | 0 Count | 45 Count | 0 Count | 0 VDC | 0 VDC |
| 1756857583 | 567 Count | 1033 Count | 0 Count | 0 VDC | 0 VDC |
| 1756855480 | 566 Count | 997 Count | 0 Count | 0 VDC | 0 VDC |
| 1756853376 | 565 Count | 953 Count | 0 Count | 0 VDC | 0 VDC |
| 1756851273 | 564 Count | 920 Count | 0 Count | 0 VDC | 0 VDC |
| 1756849170 | 563 Count | 877 Count | 0 Count | 0 VDC | 0 VDC |
| 1756847067 | 562 Count | 809 Count | 0 Count | 0 VDC | 0 VDC |
| 1756845691 | 561 Count | 770 Count | 0 Count | 0 VDC | 0 VDC |
| 1756843588 | 560 Count | 734 Count | 0 Count | 0 VDC | 0 VDC |
| 1756841485 | 559 Count | 690 Count | 0 Count | 0 VDC | 0 VDC |
| 1756839381 | 558 Count | 636 Count | 0 Count | 0 VDC | 0 VDC |
| 1756837278 | 557 Count | 580 Count | 0 Count | 0 VDC | 0 VDC |
| 1756835174 | 556 Count | 540 Count | 0 Count | 0 VDC | 0 VDC |
| 1756833071 | 555 Count | 468 Count | 0 Count | 0 VDC | 0 VDC |
| 1756832964 | 554 Count | 466 Count | 0 Count | 0 VDC | 0 VDC |
| 1756832958 | 553 Count | 466 Count | 0 Count | 0 VDC | 0 VDC |
| 1756832950 | 552 Count | 466 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)