This is the latest recevied telemetry packets stored in our database for station/object EA4ATS-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1760832430 | 17 Count | 708 Count | 0 Count | 0 VDC | 0 VDC |
| 1760830626 | 16 Count | 671 Count | 0 Count | 0 VDC | 0 VDC |
| 1760828823 | 15 Count | 630 Count | 0 Count | 0 VDC | 0 VDC |
| 1760827020 | 14 Count | 593 Count | 0 Count | 0 VDC | 0 VDC |
| 1760825217 | 13 Count | 559 Count | 0 Count | 0 VDC | 0 VDC |
| 1760823414 | 12 Count | 526 Count | 0 Count | 0 VDC | 0 VDC |
| 1760821610 | 11 Count | 492 Count | 0 Count | 0 VDC | 0 VDC |
| 1760819807 | 10 Count | 458 Count | 0 Count | 0 VDC | 0 VDC |
| 1760818004 | 9 Count | 422 Count | 0 Count | 0 VDC | 0 VDC |
| 1760816201 | 8 Count | 395 Count | 0 Count | 0 VDC | 0 VDC |
| 1760814398 | 7 Count | 365 Count | 0 Count | 0 VDC | 0 VDC |
| 1760812595 | 6 Count | 337 Count | 0 Count | 0 VDC | 0 VDC |
| 1760810829 | 5 Count | 307 Count | 0 Count | 0 VDC | 0 VDC |
| 1760809026 | 4 Count | 241 Count | 0 Count | 0 VDC | 0 VDC |
| 1760807223 | 3 Count | 204 Count | 0 Count | 0 VDC | 0 VDC |
| 1760805420 | 2 Count | 154 Count | 0 Count | 0 VDC | 0 VDC |
| 1760803617 | 1 Count | 123 Count | 0 Count | 0 VDC | 0 VDC |
| 1760801813 | 0 Count | 48 Count | 0 Count | 0 VDC | 0 VDC |
| 1760800010 | 18 Count | 1040 Count | 0 Count | 0 VDC | 0 VDC |
| 1760798206 | 17 Count | 970 Count | 0 Count | 0 VDC | 0 VDC |
| 1760796403 | 16 Count | 922 Count | 0 Count | 0 VDC | 0 VDC |
| 1760794600 | 15 Count | 880 Count | 0 Count | 0 VDC | 0 VDC |
| 1760792797 | 14 Count | 844 Count | 0 Count | 0 VDC | 0 VDC |
| 1760790994 | 13 Count | 795 Count | 0 Count | 0 VDC | 0 VDC |
| 1760789228 | 12 Count | 744 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)