This is the latest recevied telemetry packets stored in our database for station/object EA4ATS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773796332 | 5 Count | 1094 Count | 0 Count | 0 VDC | 0 VDC |
| 1773794528 | 4 Count | 893 Count | 0 Count | 0 VDC | 0 VDC |
| 1773792725 | 3 Count | 739 Count | 0 Count | 0 VDC | 0 VDC |
| 1773790922 | 2 Count | 554 Count | 0 Count | 0 VDC | 0 VDC |
| 1773789118 | 1 Count | 390 Count | 0 Count | 0 VDC | 0 VDC |
| 1773787314 | 0 Count | 203 Count | 0 Count | 0 VDC | 0 VDC |
| 1773785511 | 11 Count | 1006 Count | 0 Count | 0 VDC | 0 VDC |
| 1773783707 | 10 Count | 814 Count | 0 Count | 0 VDC | 0 VDC |
| 1773781936 | 9 Count | 662 Count | 0 Count | 0 VDC | 0 VDC |
| 1773780133 | 8 Count | 572 Count | 0 Count | 0 VDC | 0 VDC |
| 1773778329 | 7 Count | 499 Count | 0 Count | 0 VDC | 0 VDC |
| 1773776526 | 6 Count | 455 Count | 0 Count | 0 VDC | 0 VDC |
| 1773774723 | 5 Count | 396 Count | 0 Count | 0 VDC | 0 VDC |
| 1773772919 | 4 Count | 307 Count | 0 Count | 0 VDC | 0 VDC |
| 1773771116 | 3 Count | 252 Count | 0 Count | 0 VDC | 0 VDC |
| 1773769313 | 2 Count | 203 Count | 0 Count | 0 VDC | 0 VDC |
| 1773767509 | 1 Count | 149 Count | 0 Count | 0 VDC | 0 VDC |
| 1773765706 | 0 Count | 100 Count | 0 Count | 0 VDC | 0 VDC |
| 1773763936 | 15 Count | 1022 Count | 0 Count | 0 VDC | 0 VDC |
| 1773762132 | 14 Count | 945 Count | 0 Count | 0 VDC | 0 VDC |
| 1773760329 | 13 Count | 883 Count | 0 Count | 0 VDC | 0 VDC |
| 1773758525 | 12 Count | 831 Count | 0 Count | 0 VDC | 0 VDC |
| 1773756723 | 11 Count | 766 Count | 0 Count | 0 VDC | 0 VDC |
| 1773754919 | 10 Count | 693 Count | 0 Count | 0 VDC | 0 VDC |
| 1773753116 | 9 Count | 628 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)