This is the latest recevied telemetry packets stored in our database for station/object IT9EWK-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1751928401 | 265 Count | 217 Count | 0 Count | 0 VDC | 0 VDC |
| 1751926597 | 264 Count | 210 Count | 0 Count | 0 VDC | 0 VDC |
| 1751924794 | 263 Count | 203 Count | 0 Count | 0 VDC | 0 VDC |
| 1751922990 | 262 Count | 197 Count | 0 Count | 0 VDC | 0 VDC |
| 1751921187 | 261 Count | 190 Count | 0 Count | 0 VDC | 0 VDC |
| 1751919383 | 260 Count | 183 Count | 0 Count | 0 VDC | 0 VDC |
| 1751917580 | 259 Count | 175 Count | 0 Count | 0 VDC | 0 VDC |
| 1751915776 | 258 Count | 167 Count | 0 Count | 0 VDC | 0 VDC |
| 1751913972 | 257 Count | 161 Count | 0 Count | 0 VDC | 0 VDC |
| 1751912169 | 256 Count | 152 Count | 0 Count | 0 VDC | 0 VDC |
| 1751910365 | 255 Count | 138 Count | 0 Count | 0 VDC | 0 VDC |
| 1751908562 | 254 Count | 128 Count | 0 Count | 0 VDC | 0 VDC |
| 1751907781 | 249 Count | 128 Count | 0 Count | 0 VDC | 0 VDC |
| 1751905977 | 248 Count | 122 Count | 0 Count | 0 VDC | 0 VDC |
| 1751905331 | 243 Count | 122 Count | 0 Count | 0 VDC | 0 VDC |
| 1751903528 | 242 Count | 117 Count | 0 Count | 0 VDC | 0 VDC |
| 1751903058 | 237 Count | 115 Count | 0 Count | 0 VDC | 0 VDC |
| 1751902704 | 232 Count | 115 Count | 0 Count | 0 VDC | 0 VDC |
| 1751902243 | 227 Count | 110 Count | 0 Count | 0 VDC | 0 VDC |
| 1751901907 | 222 Count | 110 Count | 0 Count | 0 VDC | 0 VDC |
| 1751900103 | 221 Count | 106 Count | 0 Count | 0 VDC | 0 VDC |
| 1751899922 | 216 Count | 106 Count | 0 Count | 0 VDC | 0 VDC |
| 1751899297 | 211 Count | 106 Count | 0 Count | 0 VDC | 0 VDC |
| 1751898796 | 206 Count | 105 Count | 0 Count | 0 VDC | 0 VDC |
| 1751896992 | 205 Count | 99 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)