This is the latest recevied telemetry packets stored in our database for station/object SP3MCY-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1763870568 | 274 Count | 289 Count | 210 Count | 0 VDC | 0 VDC |
| 1763868764 | 273 Count | 288 Count | 210 Count | 0 VDC | 0 VDC |
| 1763866961 | 268 Count | 283 Count | 206 Count | 0 VDC | 0 VDC |
| 1763865200 | 265 Count | 280 Count | 204 Count | 0 VDC | 0 VDC |
| 1763863397 | 264 Count | 279 Count | 204 Count | 0 VDC | 0 VDC |
| 1763861594 | 263 Count | 278 Count | 204 Count | 0 VDC | 0 VDC |
| 1763859791 | 262 Count | 277 Count | 204 Count | 0 VDC | 0 VDC |
| 1763857987 | 261 Count | 276 Count | 204 Count | 0 VDC | 0 VDC |
| 1763856184 | 260 Count | 275 Count | 204 Count | 0 VDC | 0 VDC |
| 1763854381 | 259 Count | 274 Count | 204 Count | 0 VDC | 0 VDC |
| 1763852578 | 258 Count | 273 Count | 204 Count | 0 VDC | 0 VDC |
| 1763850775 | 257 Count | 272 Count | 204 Count | 0 VDC | 0 VDC |
| 1763848972 | 256 Count | 271 Count | 204 Count | 0 VDC | 0 VDC |
| 1763847168 | 255 Count | 270 Count | 204 Count | 0 VDC | 0 VDC |
| 1763845366 | 254 Count | 269 Count | 204 Count | 0 VDC | 0 VDC |
| 1763843594 | 253 Count | 268 Count | 204 Count | 0 VDC | 0 VDC |
| 1763841791 | 252 Count | 267 Count | 204 Count | 0 VDC | 0 VDC |
| 1763839988 | 251 Count | 266 Count | 204 Count | 0 VDC | 0 VDC |
| 1763838185 | 250 Count | 265 Count | 204 Count | 0 VDC | 0 VDC |
| 1763836381 | 249 Count | 264 Count | 204 Count | 0 VDC | 0 VDC |
| 1763834578 | 248 Count | 263 Count | 204 Count | 0 VDC | 0 VDC |
| 1763832775 | 247 Count | 262 Count | 204 Count | 0 VDC | 0 VDC |
| 1763830972 | 246 Count | 261 Count | 204 Count | 0 VDC | 0 VDC |
| 1763829169 | 245 Count | 260 Count | 204 Count | 0 VDC | 0 VDC |
| 1763827366 | 244 Count | 259 Count | 204 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)