This is the latest recevied telemetry packets stored in our database for station/object SP5UID-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1756072245 | 2 Count | 100 Count | 0 Count | 0 VDC | 0 VDC |
| 1756070504 | 1 Count | 77 Count | 0 Count | 0 VDC | 0 VDC |
| 1756068763 | 0 Count | 36 Count | 0 Count | 0 VDC | 0 VDC |
| 1756067022 | 45 Count | 1017 Count | 0 Count | 0 VDC | 0 VDC |
| 1756065285 | 44 Count | 961 Count | 0 Count | 0 VDC | 0 VDC |
| 1756063540 | 43 Count | 903 Count | 0 Count | 0 VDC | 0 VDC |
| 1756061799 | 42 Count | 858 Count | 0 Count | 0 VDC | 0 VDC |
| 1756060058 | 41 Count | 820 Count | 0 Count | 0 VDC | 0 VDC |
| 1756058317 | 40 Count | 784 Count | 0 Count | 0 VDC | 0 VDC |
| 1756056788 | 39 Count | 784 Count | 0 Count | 0 VDC | 0 VDC |
| 1756055047 | 38 Count | 746 Count | 0 Count | 0 VDC | 0 VDC |
| 1756053306 | 37 Count | 707 Count | 0 Count | 0 VDC | 0 VDC |
| 1756051565 | 36 Count | 623 Count | 0 Count | 0 VDC | 0 VDC |
| 1756049824 | 35 Count | 570 Count | 0 Count | 0 VDC | 0 VDC |
| 1756048083 | 34 Count | 533 Count | 0 Count | 0 VDC | 0 VDC |
| 1756046342 | 33 Count | 495 Count | 0 Count | 0 VDC | 0 VDC |
| 1756044601 | 32 Count | 451 Count | 0 Count | 0 VDC | 0 VDC |
| 1756042860 | 31 Count | 419 Count | 0 Count | 0 VDC | 0 VDC |
| 1756041119 | 30 Count | 381 Count | 0 Count | 0 VDC | 0 VDC |
| 1756039378 | 29 Count | 342 Count | 0 Count | 0 VDC | 0 VDC |
| 1756037637 | 28 Count | 311 Count | 0 Count | 0 VDC | 0 VDC |
| 1756036927 | 27 Count | 297 Count | 0 Count | 0 VDC | 0 VDC |
| 1756035186 | 26 Count | 258 Count | 0 Count | 0 VDC | 0 VDC |
| 1756033445 | 5 Count | 219 Count | 0 Count | 0 VDC | 0 VDC |
| 1756031704 | 4 Count | 176 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)