This is the latest recevied telemetry packets stored in our database for station/object SR2JP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762464410 | 761 Count | 889 Count | 56 Count | 0 VDC | 0 VDC |
| 1762462729 | 760 Count | 888 Count | 56 Count | 0 VDC | 0 VDC |
| 1762461048 | 758 Count | 887 Count | 56 Count | 0 VDC | 0 VDC |
| 1762459618 | 754 Count | 881 Count | 56 Count | 0 VDC | 0 VDC |
| 1762457938 | 753 Count | 880 Count | 56 Count | 0 VDC | 0 VDC |
| 1762456257 | 752 Count | 879 Count | 56 Count | 0 VDC | 0 VDC |
| 1762454576 | 751 Count | 878 Count | 56 Count | 0 VDC | 0 VDC |
| 1762452895 | 750 Count | 877 Count | 56 Count | 0 VDC | 0 VDC |
| 1762449534 | 748 Count | 873 Count | 56 Count | 0 VDC | 0 VDC |
| 1762447853 | 747 Count | 868 Count | 56 Count | 0 VDC | 0 VDC |
| 1762446173 | 746 Count | 859 Count | 56 Count | 0 VDC | 0 VDC |
| 1762439447 | 741 Count | 855 Count | 56 Count | 0 VDC | 0 VDC |
| 1762438015 | 737 Count | 849 Count | 56 Count | 0 VDC | 0 VDC |
| 1762436335 | 736 Count | 848 Count | 56 Count | 0 VDC | 0 VDC |
| 1762434654 | 735 Count | 847 Count | 56 Count | 0 VDC | 0 VDC |
| 1762432974 | 734 Count | 846 Count | 56 Count | 0 VDC | 0 VDC |
| 1762431292 | 733 Count | 845 Count | 56 Count | 0 VDC | 0 VDC |
| 1762429611 | 732 Count | 844 Count | 56 Count | 0 VDC | 0 VDC |
| 1762427931 | 731 Count | 835 Count | 56 Count | 0 VDC | 0 VDC |
| 1762426250 | 730 Count | 834 Count | 56 Count | 0 VDC | 0 VDC |
| 1762424569 | 729 Count | 828 Count | 56 Count | 0 VDC | 0 VDC |
| 1762422888 | 720 Count | 814 Count | 48 Count | 0 VDC | 0 VDC |
| 1762421208 | 713 Count | 800 Count | 42 Count | 0 VDC | 0 VDC |
| 1762419527 | 710 Count | 797 Count | 40 Count | 0 VDC | 0 VDC |
| 1762417846 | 707 Count | 794 Count | 39 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)