This is the latest recevied telemetry packets stored in our database for station/object LW2DHT-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781946814 | 864 Count | 816 Count | 635 Count | 0 VDC | 0 VDC |
| 1781945011 | 860 Count | 812 Count | 632 Count | 0 VDC | 0 VDC |
| 1781943208 | 856 Count | 808 Count | 629 Count | 0 VDC | 0 VDC |
| 1781941405 | 852 Count | 804 Count | 626 Count | 0 VDC | 0 VDC |
| 1781939602 | 848 Count | 800 Count | 623 Count | 0 VDC | 0 VDC |
| 1781937799 | 844 Count | 796 Count | 620 Count | 0 VDC | 0 VDC |
| 1781934227 | 832 Count | 789 Count | 614 Count | 0 VDC | 0 VDC |
| 1781928818 | 819 Count | 778 Count | 604 Count | 0 VDC | 0 VDC |
| 1781927014 | 814 Count | 773 Count | 600 Count | 0 VDC | 0 VDC |
| 1781925212 | 809 Count | 768 Count | 596 Count | 0 VDC | 0 VDC |
| 1781921605 | 800 Count | 760 Count | 589 Count | 0 VDC | 0 VDC |
| 1781919802 | 796 Count | 756 Count | 586 Count | 0 VDC | 0 VDC |
| 1781917999 | 792 Count | 752 Count | 583 Count | 0 VDC | 0 VDC |
| 1781916196 | 788 Count | 748 Count | 580 Count | 0 VDC | 0 VDC |
| 1781912624 | 775 Count | 740 Count | 573 Count | 0 VDC | 0 VDC |
| 1781910821 | 770 Count | 735 Count | 569 Count | 0 VDC | 0 VDC |
| 1781907214 | 761 Count | 727 Count | 562 Count | 0 VDC | 0 VDC |
| 1781905411 | 756 Count | 722 Count | 558 Count | 0 VDC | 0 VDC |
| 1781903608 | 752 Count | 718 Count | 555 Count | 0 VDC | 0 VDC |
| 1781901805 | 749 Count | 715 Count | 553 Count | 0 VDC | 0 VDC |
| 1781900003 | 745 Count | 708 Count | 550 Count | 0 VDC | 0 VDC |
| 1781896397 | 737 Count | 701 Count | 544 Count | 0 VDC | 0 VDC |
| 1781894593 | 733 Count | 697 Count | 541 Count | 0 VDC | 0 VDC |
| 1781891026 | 719 Count | 688 Count | 533 Count | 0 VDC | 0 VDC |
| 1781889223 | 714 Count | 683 Count | 529 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)