This is the latest recevied telemetry packets stored in our database for station/object SR2WH-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765977088 | 82 Count | 151 Count | 80 Count | 0 VDC | 0 VDC |
| 1765975287 | 62 Count | 111 Count | 61 Count | 0 VDC | 0 VDC |
| 1765973486 | 26 Count | 51 Count | 26 Count | 0 VDC | 0 VDC |
| 1765971686 | 518 Count | 1029 Count | 482 Count | 0 VDC | 0 VDC |
| 1765969885 | 498 Count | 987 Count | 463 Count | 0 VDC | 0 VDC |
| 1765968085 | 470 Count | 939 Count | 436 Count | 0 VDC | 0 VDC |
| 1765966284 | 446 Count | 889 Count | 413 Count | 0 VDC | 0 VDC |
| 1765964516 | 411 Count | 837 Count | 394 Count | 0 VDC | 0 VDC |
| 1765962715 | 391 Count | 798 Count | 375 Count | 0 VDC | 0 VDC |
| 1765960914 | 367 Count | 750 Count | 352 Count | 0 VDC | 0 VDC |
| 1765959114 | 345 Count | 707 Count | 331 Count | 0 VDC | 0 VDC |
| 1765957313 | 282 Count | 621 Count | 269 Count | 0 VDC | 0 VDC |
| 1765955512 | 251 Count | 562 Count | 239 Count | 0 VDC | 0 VDC |
| 1765953712 | 234 Count | 519 Count | 223 Count | 0 VDC | 0 VDC |
| 1765951911 | 199 Count | 458 Count | 189 Count | 0 VDC | 0 VDC |
| 1765950111 | 174 Count | 409 Count | 165 Count | 0 VDC | 0 VDC |
| 1765948310 | 158 Count | 366 Count | 150 Count | 0 VDC | 0 VDC |
| 1765946509 | 141 Count | 327 Count | 134 Count | 0 VDC | 0 VDC |
| 1765944709 | 121 Count | 282 Count | 115 Count | 0 VDC | 0 VDC |
| 1765942908 | 103 Count | 245 Count | 98 Count | 0 VDC | 0 VDC |
| 1765915898 | 379 Count | 695 Count | 336 Count | 0 VDC | 0 VDC |
| 1765914097 | 366 Count | 658 Count | 324 Count | 0 VDC | 0 VDC |
| 1765912297 | 343 Count | 624 Count | 312 Count | 0 VDC | 0 VDC |
| 1765910496 | 331 Count | 593 Count | 301 Count | 0 VDC | 0 VDC |
| 1765908695 | 313 Count | 552 Count | 286 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)