This is the latest recevied telemetry packets stored in our database for station/object SR2CA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1772525759 | 526 Count | 902 Count | 0 Count | 0 VDC | 0 VDC |
| 1772524078 | 525 Count | 893 Count | 0 Count | 0 VDC | 0 VDC |
| 1772522397 | 523 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1772520978 | 519 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1772519297 | 518 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1772517616 | 517 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1772515935 | 516 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1772514254 | 515 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1772512572 | 514 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1772510892 | 513 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1772509210 | 512 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1772507530 | 511 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1772505849 | 510 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1772504168 | 509 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1772502487 | 508 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1772500806 | 507 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1772499384 | 502 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1772497703 | 501 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1772496022 | 500 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1772494334 | 499 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1772492653 | 498 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1772490972 | 497 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1772489292 | 496 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1772487607 | 495 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1772485927 | 494 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)