This is the latest recevied telemetry packets stored in our database for station/object SR2DTW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765946205 | 392 Count | 576 Count | 294 Count | 0 VDC | 0 VDC |
| 1765944524 | 388 Count | 570 Count | 291 Count | 0 VDC | 0 VDC |
| 1765942842 | 381 Count | 561 Count | 285 Count | 0 VDC | 0 VDC |
| 1765941162 | 376 Count | 554 Count | 281 Count | 0 VDC | 0 VDC |
| 1765939481 | 372 Count | 548 Count | 278 Count | 0 VDC | 0 VDC |
| 1765937800 | 367 Count | 536 Count | 274 Count | 0 VDC | 0 VDC |
| 1765936119 | 362 Count | 529 Count | 270 Count | 0 VDC | 0 VDC |
| 1765934438 | 357 Count | 522 Count | 266 Count | 0 VDC | 0 VDC |
| 1765932758 | 352 Count | 516 Count | 262 Count | 0 VDC | 0 VDC |
| 1765931077 | 348 Count | 510 Count | 259 Count | 0 VDC | 0 VDC |
| 1765929645 | 340 Count | 504 Count | 256 Count | 0 VDC | 0 VDC |
| 1765927964 | 335 Count | 492 Count | 252 Count | 0 VDC | 0 VDC |
| 1765926284 | 330 Count | 485 Count | 248 Count | 0 VDC | 0 VDC |
| 1765924603 | 325 Count | 478 Count | 244 Count | 0 VDC | 0 VDC |
| 1765922922 | 321 Count | 472 Count | 241 Count | 0 VDC | 0 VDC |
| 1765921241 | 314 Count | 463 Count | 235 Count | 0 VDC | 0 VDC |
| 1765919561 | 310 Count | 458 Count | 232 Count | 0 VDC | 0 VDC |
| 1765917880 | 306 Count | 452 Count | 229 Count | 0 VDC | 0 VDC |
| 1765916199 | 301 Count | 440 Count | 225 Count | 0 VDC | 0 VDC |
| 1765914518 | 296 Count | 433 Count | 221 Count | 0 VDC | 0 VDC |
| 1765912838 | 291 Count | 426 Count | 217 Count | 0 VDC | 0 VDC |
| 1765911157 | 286 Count | 420 Count | 213 Count | 0 VDC | 0 VDC |
| 1765909476 | 282 Count | 414 Count | 210 Count | 0 VDC | 0 VDC |
| 1765908044 | 274 Count | 408 Count | 207 Count | 0 VDC | 0 VDC |
| 1765906363 | 269 Count | 397 Count | 203 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)