This is the latest recevied telemetry packets stored in our database for station/object SR2ZXT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781721788 | 303 Count | 923 Count | 236 Count | 0 VDC | 0 VDC |
| 1781719987 | 300 Count | 910 Count | 234 Count | 0 VDC | 0 VDC |
| 1781718186 | 297 Count | 898 Count | 232 Count | 0 VDC | 0 VDC |
| 1781716385 | 291 Count | 883 Count | 227 Count | 0 VDC | 0 VDC |
| 1781714585 | 286 Count | 865 Count | 223 Count | 0 VDC | 0 VDC |
| 1781712784 | 283 Count | 854 Count | 221 Count | 0 VDC | 0 VDC |
| 1781710983 | 280 Count | 843 Count | 219 Count | 0 VDC | 0 VDC |
| 1781709189 | 276 Count | 830 Count | 217 Count | 0 VDC | 0 VDC |
| 1781707388 | 272 Count | 819 Count | 214 Count | 0 VDC | 0 VDC |
| 1781705588 | 268 Count | 808 Count | 211 Count | 0 VDC | 0 VDC |
| 1781703787 | 263 Count | 788 Count | 207 Count | 0 VDC | 0 VDC |
| 1781701986 | 258 Count | 774 Count | 203 Count | 0 VDC | 0 VDC |
| 1781700186 | 238 Count | 745 Count | 184 Count | 0 VDC | 0 VDC |
| 1781698385 | 233 Count | 731 Count | 180 Count | 0 VDC | 0 VDC |
| 1781696584 | 230 Count | 720 Count | 178 Count | 0 VDC | 0 VDC |
| 1781694783 | 227 Count | 708 Count | 176 Count | 0 VDC | 0 VDC |
| 1781692983 | 222 Count | 688 Count | 172 Count | 0 VDC | 0 VDC |
| 1781691182 | 219 Count | 676 Count | 170 Count | 0 VDC | 0 VDC |
| 1781689382 | 216 Count | 664 Count | 168 Count | 0 VDC | 0 VDC |
| 1781687590 | 213 Count | 652 Count | 166 Count | 0 VDC | 0 VDC |
| 1781685788 | 210 Count | 640 Count | 164 Count | 0 VDC | 0 VDC |
| 1781683987 | 207 Count | 628 Count | 162 Count | 0 VDC | 0 VDC |
| 1781682186 | 204 Count | 612 Count | 160 Count | 0 VDC | 0 VDC |
| 1781680386 | 201 Count | 601 Count | 158 Count | 0 VDC | 0 VDC |
| 1781678585 | 198 Count | 591 Count | 156 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)