This is the latest recevied telemetry packets stored in our database for station/object SR2ST-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781959363 | 164 Count | 100 Count | 39 Count | 0 VDC | 0 VDC |
| 1781957683 | 148 Count | 90 Count | 35 Count | 0 VDC | 0 VDC |
| 1781956002 | 135 Count | 81 Count | 32 Count | 0 VDC | 0 VDC |
| 1781954321 | 119 Count | 72 Count | 28 Count | 0 VDC | 0 VDC |
| 1781952640 | 106 Count | 63 Count | 25 Count | 0 VDC | 0 VDC |
| 1781950959 | 93 Count | 55 Count | 22 Count | 0 VDC | 0 VDC |
| 1781949279 | 77 Count | 45 Count | 18 Count | 0 VDC | 0 VDC |
| 1781947598 | 64 Count | 36 Count | 15 Count | 0 VDC | 0 VDC |
| 1781945917 | 45 Count | 27 Count | 11 Count | 0 VDC | 0 VDC |
| 1781944236 | 30 Count | 17 Count | 7 Count | 0 VDC | 0 VDC |
| 1781942555 | 14 Count | 8 Count | 3 Count | 0 VDC | 0 VDC |
| 1781941124 | 1013 Count | 597 Count | 242 Count | 0 VDC | 0 VDC |
| 1781939443 | 998 Count | 587 Count | 238 Count | 0 VDC | 0 VDC |
| 1781937762 | 978 Count | 579 Count | 235 Count | 0 VDC | 0 VDC |
| 1781936082 | 960 Count | 569 Count | 231 Count | 0 VDC | 0 VDC |
| 1781934401 | 945 Count | 559 Count | 227 Count | 0 VDC | 0 VDC |
| 1781932720 | 929 Count | 550 Count | 223 Count | 0 VDC | 0 VDC |
| 1781931039 | 916 Count | 541 Count | 220 Count | 0 VDC | 0 VDC |
| 1781929358 | 900 Count | 532 Count | 216 Count | 0 VDC | 0 VDC |
| 1781927678 | 883 Count | 522 Count | 212 Count | 0 VDC | 0 VDC |
| 1781925997 | 870 Count | 513 Count | 209 Count | 0 VDC | 0 VDC |
| 1781924316 | 854 Count | 504 Count | 205 Count | 0 VDC | 0 VDC |
| 1781922635 | 843 Count | 496 Count | 203 Count | 0 VDC | 0 VDC |
| 1781920954 | 828 Count | 487 Count | 199 Count | 0 VDC | 0 VDC |
| 1781919523 | 814 Count | 479 Count | 196 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)