This is the latest recevied telemetry packets stored in our database for station/object ON4CDR-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774638861 | 718 Count | 919 Count | 0 Count | 0 VDC | 0 VDC |
| 1774637961 | 697 Count | 891 Count | 0 Count | 0 VDC | 0 VDC |
| 1774637055 | 686 Count | 850 Count | 0 Count | 0 VDC | 0 VDC |
| 1774636153 | 665 Count | 826 Count | 0 Count | 0 VDC | 0 VDC |
| 1774635696 | 494 Count | 597 Count | 0 Count | 0 VDC | 0 VDC |
| 1774635249 | 645 Count | 795 Count | 0 Count | 0 VDC | 0 VDC |
| 1774634346 | 622 Count | 772 Count | 0 Count | 0 VDC | 0 VDC |
| 1774634003 | 474 Count | 565 Count | 0 Count | 0 VDC | 0 VDC |
| 1774633443 | 603 Count | 733 Count | 0 Count | 0 VDC | 0 VDC |
| 1774632539 | 580 Count | 712 Count | 0 Count | 0 VDC | 0 VDC |
| 1774631636 | 558 Count | 687 Count | 0 Count | 0 VDC | 0 VDC |
| 1774631399 | 449 Count | 543 Count | 0 Count | 0 VDC | 0 VDC |
| 1774630733 | 536 Count | 655 Count | 0 Count | 0 VDC | 0 VDC |
| 1774629830 | 516 Count | 620 Count | 0 Count | 0 VDC | 0 VDC |
| 1774628926 | 494 Count | 597 Count | 0 Count | 0 VDC | 0 VDC |
| 1774628223 | 409 Count | 483 Count | 0 Count | 0 VDC | 0 VDC |
| 1774628023 | 474 Count | 565 Count | 0 Count | 0 VDC | 0 VDC |
| 1774627118 | 449 Count | 543 Count | 0 Count | 0 VDC | 0 VDC |
| 1774626688 | 387 Count | 453 Count | 0 Count | 0 VDC | 0 VDC |
| 1774626215 | 429 Count | 511 Count | 0 Count | 0 VDC | 0 VDC |
| 1774625312 | 409 Count | 483 Count | 0 Count | 0 VDC | 0 VDC |
| 1774624409 | 387 Count | 453 Count | 0 Count | 0 VDC | 0 VDC |
| 1774623506 | 367 Count | 422 Count | 0 Count | 0 VDC | 0 VDC |
| 1774622684 | 348 Count | 393 Count | 0 Count | 0 VDC | 0 VDC |
| 1774621869 | 175 Count | 198 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)