This is the latest recevied telemetry packets stored in our database for station/object F1IXL-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782015621 | 265 Count | 784 Count | 227 Count | 0 VDC | 0 VDC |
| 1782015017 | 257 Count | 760 Count | 220 Count | 0 VDC | 0 VDC |
| 1782013811 | 241 Count | 727 Count | 206 Count | 0 VDC | 0 VDC |
| 1782013207 | 234 Count | 702 Count | 200 Count | 0 VDC | 0 VDC |
| 1782012603 | 225 Count | 678 Count | 192 Count | 0 VDC | 0 VDC |
| 1782011999 | 218 Count | 654 Count | 186 Count | 0 VDC | 0 VDC |
| 1781989945 | 303 Count | 828 Count | 232 Count | 0 VDC | 0 VDC |
| 1781989342 | 296 Count | 804 Count | 226 Count | 0 VDC | 0 VDC |
| 1781988739 | 288 Count | 780 Count | 219 Count | 0 VDC | 0 VDC |
| 1781988135 | 280 Count | 752 Count | 212 Count | 0 VDC | 0 VDC |
| 1781987531 | 276 Count | 733 Count | 209 Count | 0 VDC | 0 VDC |
| 1781986928 | 268 Count | 714 Count | 202 Count | 0 VDC | 0 VDC |
| 1781986324 | 258 Count | 685 Count | 193 Count | 0 VDC | 0 VDC |
| 1781985116 | 247 Count | 651 Count | 184 Count | 0 VDC | 0 VDC |
| 1781984513 | 238 Count | 622 Count | 176 Count | 0 VDC | 0 VDC |
| 1781983908 | 232 Count | 601 Count | 171 Count | 0 VDC | 0 VDC |
| 1781983304 | 223 Count | 581 Count | 163 Count | 0 VDC | 0 VDC |
| 1781982701 | 214 Count | 552 Count | 155 Count | 0 VDC | 0 VDC |
| 1781982097 | 208 Count | 526 Count | 150 Count | 0 VDC | 0 VDC |
| 1781981494 | 200 Count | 506 Count | 143 Count | 0 VDC | 0 VDC |
| 1781980890 | 191 Count | 478 Count | 135 Count | 0 VDC | 0 VDC |
| 1781979683 | 180 Count | 444 Count | 126 Count | 0 VDC | 0 VDC |
| 1781979079 | 174 Count | 423 Count | 121 Count | 0 VDC | 0 VDC |
| 1781978477 | 169 Count | 403 Count | 117 Count | 0 VDC | 0 VDC |
| 1781977872 | 161 Count | 376 Count | 110 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)