This is the latest recevied telemetry packets stored in our database for station/object M9PHD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781800503 | 600 Count | 404 Count | 252 Count | 0 VDC | 0 VDC |
| 1781799902 | 599 Count | 404 Count | 252 Count | 0 VDC | 0 VDC |
| 1781799301 | 598 Count | 404 Count | 252 Count | 0 VDC | 0 VDC |
| 1781798700 | 597 Count | 404 Count | 252 Count | 0 VDC | 0 VDC |
| 1781798100 | 596 Count | 404 Count | 252 Count | 0 VDC | 0 VDC |
| 1781797499 | 595 Count | 404 Count | 252 Count | 0 VDC | 0 VDC |
| 1781796898 | 593 Count | 402 Count | 251 Count | 0 VDC | 0 VDC |
| 1781796298 | 591 Count | 400 Count | 250 Count | 0 VDC | 0 VDC |
| 1781795697 | 589 Count | 398 Count | 249 Count | 0 VDC | 0 VDC |
| 1781795096 | 587 Count | 396 Count | 248 Count | 0 VDC | 0 VDC |
| 1781794496 | 585 Count | 394 Count | 247 Count | 0 VDC | 0 VDC |
| 1781793895 | 583 Count | 392 Count | 246 Count | 0 VDC | 0 VDC |
| 1781793294 | 581 Count | 390 Count | 245 Count | 0 VDC | 0 VDC |
| 1781792694 | 579 Count | 388 Count | 244 Count | 0 VDC | 0 VDC |
| 1781792093 | 573 Count | 382 Count | 239 Count | 0 VDC | 0 VDC |
| 1781791492 | 571 Count | 380 Count | 238 Count | 0 VDC | 0 VDC |
| 1781790892 | 569 Count | 378 Count | 237 Count | 0 VDC | 0 VDC |
| 1781790291 | 567 Count | 376 Count | 236 Count | 0 VDC | 0 VDC |
| 1781789690 | 565 Count | 374 Count | 235 Count | 0 VDC | 0 VDC |
| 1781789089 | 563 Count | 372 Count | 234 Count | 0 VDC | 0 VDC |
| 1781788489 | 561 Count | 370 Count | 233 Count | 0 VDC | 0 VDC |
| 1781787911 | 559 Count | 368 Count | 232 Count | 0 VDC | 0 VDC |
| 1781787310 | 557 Count | 366 Count | 231 Count | 0 VDC | 0 VDC |
| 1781786709 | 555 Count | 364 Count | 230 Count | 0 VDC | 0 VDC |
| 1781786109 | 553 Count | 362 Count | 229 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)