This is the latest recevied telemetry packets stored in our database for station/object IU5RCJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781139993 | 583 Count | 147 Count | 82 Count | 0 VDC | 0 VDC |
| 1781139090 | 568 Count | 145 Count | 81 Count | 0 VDC | 0 VDC |
| 1781138185 | 552 Count | 140 Count | 78 Count | 0 VDC | 0 VDC |
| 1781137282 | 537 Count | 140 Count | 78 Count | 0 VDC | 0 VDC |
| 1781136377 | 523 Count | 137 Count | 76 Count | 0 VDC | 0 VDC |
| 1781135473 | 507 Count | 132 Count | 74 Count | 0 VDC | 0 VDC |
| 1781134569 | 492 Count | 128 Count | 72 Count | 0 VDC | 0 VDC |
| 1781133665 | 476 Count | 127 Count | 71 Count | 0 VDC | 0 VDC |
| 1781132762 | 459 Count | 123 Count | 68 Count | 0 VDC | 0 VDC |
| 1781131858 | 442 Count | 120 Count | 66 Count | 0 VDC | 0 VDC |
| 1781130955 | 428 Count | 115 Count | 64 Count | 0 VDC | 0 VDC |
| 1781130051 | 412 Count | 114 Count | 63 Count | 0 VDC | 0 VDC |
| 1781129147 | 397 Count | 110 Count | 60 Count | 0 VDC | 0 VDC |
| 1781128243 | 381 Count | 108 Count | 59 Count | 0 VDC | 0 VDC |
| 1781127339 | 368 Count | 105 Count | 58 Count | 0 VDC | 0 VDC |
| 1781126435 | 353 Count | 105 Count | 58 Count | 0 VDC | 0 VDC |
| 1781125531 | 339 Count | 102 Count | 56 Count | 0 VDC | 0 VDC |
| 1781124627 | 324 Count | 101 Count | 56 Count | 0 VDC | 0 VDC |
| 1781123724 | 310 Count | 97 Count | 54 Count | 0 VDC | 0 VDC |
| 1781122820 | 291 Count | 96 Count | 53 Count | 0 VDC | 0 VDC |
| 1781121917 | 279 Count | 95 Count | 52 Count | 0 VDC | 0 VDC |
| 1781121099 | 263 Count | 93 Count | 51 Count | 0 VDC | 0 VDC |
| 1781120195 | 248 Count | 89 Count | 49 Count | 0 VDC | 0 VDC |
| 1781119291 | 232 Count | 89 Count | 49 Count | 0 VDC | 0 VDC |
| 1781118386 | 217 Count | 85 Count | 47 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)