This is the latest recevied telemetry packets stored in our database for station/object PE1PMD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782215948 | 625 Count | 955 Count | 507 Count | 0 VDC | 0 VDC |
| 1782215045 | 622 Count | 945 Count | 505 Count | 0 VDC | 0 VDC |
| 1782214141 | 616 Count | 934 Count | 500 Count | 0 VDC | 0 VDC |
| 1782213238 | 612 Count | 928 Count | 497 Count | 0 VDC | 0 VDC |
| 1782212334 | 607 Count | 918 Count | 493 Count | 0 VDC | 0 VDC |
| 1782211430 | 603 Count | 909 Count | 490 Count | 0 VDC | 0 VDC |
| 1782210527 | 597 Count | 900 Count | 485 Count | 0 VDC | 0 VDC |
| 1782209622 | 593 Count | 893 Count | 482 Count | 0 VDC | 0 VDC |
| 1782208719 | 590 Count | 887 Count | 480 Count | 0 VDC | 0 VDC |
| 1782207815 | 587 Count | 879 Count | 478 Count | 0 VDC | 0 VDC |
| 1782206912 | 583 Count | 873 Count | 475 Count | 0 VDC | 0 VDC |
| 1782206008 | 581 Count | 867 Count | 474 Count | 0 VDC | 0 VDC |
| 1782205105 | 559 Count | 845 Count | 455 Count | 0 VDC | 0 VDC |
| 1782204201 | 529 Count | 813 Count | 426 Count | 0 VDC | 0 VDC |
| 1782203297 | 521 Count | 800 Count | 419 Count | 0 VDC | 0 VDC |
| 1782202394 | 517 Count | 792 Count | 416 Count | 0 VDC | 0 VDC |
| 1782201491 | 513 Count | 784 Count | 413 Count | 0 VDC | 0 VDC |
| 1782200587 | 511 Count | 778 Count | 412 Count | 0 VDC | 0 VDC |
| 1782199683 | 507 Count | 770 Count | 409 Count | 0 VDC | 0 VDC |
| 1782198780 | 506 Count | 768 Count | 409 Count | 0 VDC | 0 VDC |
| 1782197876 | 503 Count | 763 Count | 407 Count | 0 VDC | 0 VDC |
| 1782196973 | 499 Count | 753 Count | 404 Count | 0 VDC | 0 VDC |
| 1782196069 | 497 Count | 752 Count | 403 Count | 0 VDC | 0 VDC |
| 1782195250 | 496 Count | 752 Count | 403 Count | 0 VDC | 0 VDC |
| 1782194346 | 494 Count | 749 Count | 403 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)