This is the latest recevied telemetry packets stored in our database for station/object SP1HSP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781855033 | 363 Count | 897 Count | 349 Count | 4.14 VDC | 0.14 VDC |
| 1781853230 | 334 Count | 808 Count | 321 Count | 4.14 VDC | 0.14 VDC |
| 1781851427 | 315 Count | 760 Count | 303 Count | 4.14 VDC | 0.14 VDC |
| 1781849624 | 302 Count | 727 Count | 291 Count | 4.14 VDC | 0.14 VDC |
| 1781847821 | 272 Count | 638 Count | 262 Count | 4.14 VDC | 0.14 VDC |
| 1781846018 | 248 Count | 582 Count | 239 Count | 4.14 VDC | 0.14 VDC |
| 1781844215 | 223 Count | 496 Count | 215 Count | 4.14 VDC | 0.14 VDC |
| 1781842412 | 196 Count | 427 Count | 189 Count | 4.17 VDC | 0.14 VDC |
| 1781840645 | 181 Count | 384 Count | 175 Count | 4.13 VDC | 0.14 VDC |
| 1781838842 | 164 Count | 346 Count | 159 Count | 4.13 VDC | 0.14 VDC |
| 1781837039 | 125 Count | 273 Count | 121 Count | 4.13 VDC | 0.14 VDC |
| 1781835236 | 91 Count | 210 Count | 88 Count | 4.13 VDC | 0.14 VDC |
| 1781833433 | 63 Count | 152 Count | 61 Count | 4.13 VDC | 0.14 VDC |
| 1781831630 | 44 Count | 104 Count | 43 Count | 4.13 VDC | 0.14 VDC |
| 1781829827 | 20 Count | 51 Count | 20 Count | 4.13 VDC | 0.14 VDC |
| 1781828024 | 429 Count | 1002 Count | 407 Count | 4.13 VDC | 0.14 VDC |
| 1781826221 | 407 Count | 948 Count | 386 Count | 4.13 VDC | 0.14 VDC |
| 1781824418 | 389 Count | 908 Count | 369 Count | 4.13 VDC | 0.14 VDC |
| 1781822615 | 371 Count | 860 Count | 352 Count | 4.13 VDC | 0.14 VDC |
| 1781820812 | 357 Count | 827 Count | 339 Count | 4.13 VDC | 0.14 VDC |
| 1781819044 | 335 Count | 775 Count | 318 Count | 4.13 VDC | 0.14 VDC |
| 1781817240 | 319 Count | 733 Count | 303 Count | 4.13 VDC | 0.14 VDC |
| 1781815437 | 283 Count | 660 Count | 268 Count | 4.13 VDC | 0.14 VDC |
| 1781813634 | 262 Count | 621 Count | 248 Count | 4.13 VDC | 0.14 VDC |
| 1781811832 | 238 Count | 572 Count | 225 Count | 4.13 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)