This is the latest recevied telemetry packets stored in our database for station/object DL1KDA-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777706506 | 274 Count | 779 Count | 238 Count | 0 VDC | 0 VDC |
| 1777704702 | 267 Count | 756 Count | 232 Count | 0 VDC | 0 VDC |
| 1777702898 | 260 Count | 737 Count | 226 Count | 0 VDC | 0 VDC |
| 1777701094 | 251 Count | 712 Count | 218 Count | 0 VDC | 0 VDC |
| 1777699290 | 244 Count | 690 Count | 212 Count | 0 VDC | 0 VDC |
| 1777697486 | 237 Count | 668 Count | 206 Count | 0 VDC | 0 VDC |
| 1777696213 | 216 Count | 601 Count | 188 Count | 0 VDC | 0 VDC |
| 1777696213 | 222 Count | 620 Count | 193 Count | 0 VDC | 0 VDC |
| 1777696213 | 203 Count | 560 Count | 177 Count | 0 VDC | 0 VDC |
| 1777696213 | 229 Count | 644 Count | 199 Count | 0 VDC | 0 VDC |
| 1777696213 | 183 Count | 501 Count | 160 Count | 0 VDC | 0 VDC |
| 1777696212 | 163 Count | 440 Count | 143 Count | 0 VDC | 0 VDC |
| 1777696212 | 176 Count | 480 Count | 154 Count | 0 VDC | 0 VDC |
| 1777696212 | 169 Count | 460 Count | 148 Count | 0 VDC | 0 VDC |
| 1777695682 | 229 Count | 644 Count | 199 Count | 0 VDC | 0 VDC |
| 1777693878 | 222 Count | 620 Count | 193 Count | 0 VDC | 0 VDC |
| 1777692074 | 216 Count | 601 Count | 188 Count | 0 VDC | 0 VDC |
| 1777690270 | 209 Count | 580 Count | 182 Count | 0 VDC | 0 VDC |
| 1777688466 | 203 Count | 560 Count | 177 Count | 0 VDC | 0 VDC |
| 1777684858 | 190 Count | 520 Count | 166 Count | 0 VDC | 0 VDC |
| 1777683054 | 183 Count | 501 Count | 160 Count | 0 VDC | 0 VDC |
| 1777681250 | 176 Count | 480 Count | 154 Count | 0 VDC | 0 VDC |
| 1777679446 | 169 Count | 460 Count | 148 Count | 0 VDC | 0 VDC |
| 1777677642 | 163 Count | 440 Count | 143 Count | 0 VDC | 0 VDC |
| 1777675838 | 157 Count | 421 Count | 138 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)