This is the latest recevied telemetry packets stored in our database for station/object DL1KDA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781120236 | 502 Count | 776 Count | 358 Count | 0 VDC | 0 VDC |
| 1781118432 | 499 Count | 773 Count | 356 Count | 0 VDC | 0 VDC |
| 1781116628 | 498 Count | 773 Count | 356 Count | 0 VDC | 0 VDC |
| 1781114824 | 497 Count | 772 Count | 356 Count | 0 VDC | 0 VDC |
| 1781113019 | 495 Count | 771 Count | 355 Count | 0 VDC | 0 VDC |
| 1781111215 | 493 Count | 769 Count | 354 Count | 0 VDC | 0 VDC |
| 1781109411 | 492 Count | 768 Count | 354 Count | 0 VDC | 0 VDC |
| 1781107606 | 491 Count | 767 Count | 354 Count | 0 VDC | 0 VDC |
| 1781105802 | 489 Count | 766 Count | 353 Count | 0 VDC | 0 VDC |
| 1781103998 | 488 Count | 766 Count | 353 Count | 0 VDC | 0 VDC |
| 1781102193 | 484 Count | 763 Count | 350 Count | 0 VDC | 0 VDC |
| 1781101735 | 483 Count | 763 Count | 350 Count | 0 VDC | 0 VDC |
| 1781099912 | 479 Count | 757 Count | 347 Count | 0 VDC | 0 VDC |
| 1781098108 | 478 Count | 756 Count | 347 Count | 0 VDC | 0 VDC |
| 1781096304 | 475 Count | 753 Count | 345 Count | 0 VDC | 0 VDC |
| 1781094499 | 474 Count | 752 Count | 345 Count | 0 VDC | 0 VDC |
| 1781092695 | 473 Count | 752 Count | 345 Count | 0 VDC | 0 VDC |
| 1781090890 | 472 Count | 752 Count | 345 Count | 0 VDC | 0 VDC |
| 1781089086 | 471 Count | 752 Count | 345 Count | 0 VDC | 0 VDC |
| 1781087281 | 470 Count | 751 Count | 345 Count | 0 VDC | 0 VDC |
| 1781085477 | 461 Count | 743 Count | 337 Count | 0 VDC | 0 VDC |
| 1781083723 | 460 Count | 743 Count | 337 Count | 0 VDC | 0 VDC |
| 1781081919 | 444 Count | 726 Count | 322 Count | 0 VDC | 0 VDC |
| 1781080114 | 434 Count | 712 Count | 313 Count | 0 VDC | 0 VDC |
| 1781078310 | 432 Count | 711 Count | 312 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)