This is the latest recevied telemetry packets stored in our database for station/object EA7HQG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777952418 | 64 Count | 135 Count | 53 Count | 0 VDC | 0 VDC |
| 1777950615 | 60 Count | 128 Count | 50 Count | 0 VDC | 0 VDC |
| 1777948812 | 55 Count | 119 Count | 46 Count | 0 VDC | 0 VDC |
| 1777947008 | 50 Count | 109 Count | 42 Count | 0 VDC | 0 VDC |
| 1777945205 | 46 Count | 98 Count | 39 Count | 0 VDC | 0 VDC |
| 1777943402 | 42 Count | 88 Count | 36 Count | 0 VDC | 0 VDC |
| 1777941599 | 37 Count | 75 Count | 32 Count | 0 VDC | 0 VDC |
| 1777939796 | 32 Count | 64 Count | 28 Count | 0 VDC | 0 VDC |
| 1777937993 | 25 Count | 51 Count | 22 Count | 0 VDC | 0 VDC |
| 1777936190 | 20 Count | 37 Count | 18 Count | 0 VDC | 0 VDC |
| 1777934425 | 13 Count | 24 Count | 12 Count | 0 VDC | 0 VDC |
| 1777932621 | 7 Count | 13 Count | 7 Count | 0 VDC | 0 VDC |
| 1777930818 | 374 Count | 1008 Count | 264 Count | 0 VDC | 0 VDC |
| 1777929015 | 368 Count | 997 Count | 259 Count | 0 VDC | 0 VDC |
| 1777927212 | 363 Count | 986 Count | 255 Count | 0 VDC | 0 VDC |
| 1777925409 | 358 Count | 976 Count | 251 Count | 0 VDC | 0 VDC |
| 1777923606 | 354 Count | 967 Count | 248 Count | 0 VDC | 0 VDC |
| 1777921803 | 351 Count | 958 Count | 246 Count | 0 VDC | 0 VDC |
| 1777920000 | 348 Count | 948 Count | 244 Count | 0 VDC | 0 VDC |
| 1777918196 | 344 Count | 939 Count | 241 Count | 0 VDC | 0 VDC |
| 1777916393 | 341 Count | 932 Count | 239 Count | 0 VDC | 0 VDC |
| 1777914590 | 338 Count | 926 Count | 237 Count | 0 VDC | 0 VDC |
| 1777912822 | 336 Count | 919 Count | 236 Count | 0 VDC | 0 VDC |
| 1777911019 | 335 Count | 917 Count | 236 Count | 0 VDC | 0 VDC |
| 1777909216 | 334 Count | 914 Count | 236 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)