This is the latest recevied telemetry packets stored in our database for station/object SR8RZE-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781708416 | 10 Count | 93 Count | 5 Count | 0 VDC | 0 VDC |
| 1781707516 | 8 Count | 58 Count | 4 Count | 0 VDC | 0 VDC |
| 1781706615 | 7 Count | 56 Count | 4 Count | 0 VDC | 0 VDC |
| 1781705715 | 4 Count | 27 Count | 2 Count | 0 VDC | 0 VDC |
| 1781704814 | 3 Count | 20 Count | 2 Count | 0 VDC | 0 VDC |
| 1781703913 | 0 Count | 2 Count | 0 Count | 0 VDC | 0 VDC |
| 1781703013 | 142 Count | 1014 Count | 93 Count | 0 VDC | 0 VDC |
| 1781702112 | 140 Count | 989 Count | 92 Count | 0 VDC | 0 VDC |
| 1781701212 | 138 Count | 972 Count | 91 Count | 0 VDC | 0 VDC |
| 1781700311 | 136 Count | 945 Count | 90 Count | 0 VDC | 0 VDC |
| 1781699410 | 133 Count | 931 Count | 88 Count | 0 VDC | 0 VDC |
| 1781698510 | 131 Count | 914 Count | 87 Count | 0 VDC | 0 VDC |
| 1781697610 | 129 Count | 899 Count | 86 Count | 0 VDC | 0 VDC |
| 1781696709 | 124 Count | 856 Count | 82 Count | 0 VDC | 0 VDC |
| 1781695808 | 121 Count | 847 Count | 80 Count | 0 VDC | 0 VDC |
| 1781694907 | 118 Count | 816 Count | 78 Count | 0 VDC | 0 VDC |
| 1781694007 | 117 Count | 815 Count | 78 Count | 0 VDC | 0 VDC |
| 1781693106 | 115 Count | 810 Count | 77 Count | 0 VDC | 0 VDC |
| 1781692205 | 114 Count | 809 Count | 77 Count | 0 VDC | 0 VDC |
| 1781691305 | 106 Count | 783 Count | 70 Count | 0 VDC | 0 VDC |
| 1781690404 | 103 Count | 771 Count | 69 Count | 0 VDC | 0 VDC |
| 1781689518 | 97 Count | 736 Count | 67 Count | 0 VDC | 0 VDC |
| 1781688617 | 94 Count | 720 Count | 65 Count | 0 VDC | 0 VDC |
| 1781687717 | 92 Count | 697 Count | 64 Count | 0 VDC | 0 VDC |
| 1781686816 | 91 Count | 692 Count | 64 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)