This is the latest recevied telemetry packets stored in our database for station/object EA5DHO-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781988313 | 0 Count | 609 Count | 0 Count | 0 VDC | 0 VDC |
| 1781987413 | 0 Count | 565 Count | 0 Count | 0 VDC | 0 VDC |
| 1781986513 | 0 Count | 497 Count | 0 Count | 0 VDC | 0 VDC |
| 1781985613 | 0 Count | 439 Count | 0 Count | 0 VDC | 0 VDC |
| 1781984713 | 0 Count | 395 Count | 0 Count | 0 VDC | 0 VDC |
| 1781983813 | 0 Count | 345 Count | 0 Count | 0 VDC | 0 VDC |
| 1781982913 | 0 Count | 307 Count | 0 Count | 0 VDC | 0 VDC |
| 1781982013 | 0 Count | 264 Count | 0 Count | 0 VDC | 0 VDC |
| 1781981113 | 0 Count | 225 Count | 0 Count | 0 VDC | 0 VDC |
| 1781980213 | 0 Count | 165 Count | 0 Count | 0 VDC | 0 VDC |
| 1781979313 | 0 Count | 101 Count | 0 Count | 0 VDC | 0 VDC |
| 1781978413 | 0 Count | 52 Count | 0 Count | 0 VDC | 0 VDC |
| 1781977513 | 0 Count | 1017 Count | 0 Count | 0 VDC | 0 VDC |
| 1781976613 | 0 Count | 966 Count | 0 Count | 0 VDC | 0 VDC |
| 1781975712 | 0 Count | 906 Count | 0 Count | 0 VDC | 0 VDC |
| 1781974812 | 0 Count | 857 Count | 0 Count | 0 VDC | 0 VDC |
| 1781973912 | 0 Count | 803 Count | 0 Count | 0 VDC | 0 VDC |
| 1781973012 | 0 Count | 757 Count | 0 Count | 0 VDC | 0 VDC |
| 1781972112 | 0 Count | 710 Count | 0 Count | 0 VDC | 0 VDC |
| 1781971212 | 0 Count | 672 Count | 0 Count | 0 VDC | 0 VDC |
| 1781970313 | 0 Count | 625 Count | 0 Count | 0 VDC | 0 VDC |
| 1781969413 | 0 Count | 580 Count | 0 Count | 0 VDC | 0 VDC |
| 1781968513 | 0 Count | 536 Count | 0 Count | 0 VDC | 0 VDC |
| 1781967613 | 0 Count | 482 Count | 0 Count | 0 VDC | 0 VDC |
| 1781966713 | 0 Count | 423 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)