This is the latest recevied telemetry packets stored in our database for station/object SQ9IKM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781740813 | 179 Count | 972 Count | 137 Count | 0 VDC | 0 VDC |
| 1781739913 | 173 Count | 946 Count | 132 Count | 0 VDC | 0 VDC |
| 1781739012 | 168 Count | 909 Count | 128 Count | 0 VDC | 0 VDC |
| 1781738111 | 162 Count | 887 Count | 123 Count | 0 VDC | 0 VDC |
| 1781737211 | 159 Count | 849 Count | 121 Count | 0 VDC | 0 VDC |
| 1781736310 | 152 Count | 824 Count | 115 Count | 0 VDC | 0 VDC |
| 1781735409 | 146 Count | 800 Count | 110 Count | 0 VDC | 0 VDC |
| 1781734509 | 142 Count | 776 Count | 107 Count | 0 VDC | 0 VDC |
| 1781733608 | 139 Count | 751 Count | 105 Count | 0 VDC | 0 VDC |
| 1781732707 | 133 Count | 728 Count | 100 Count | 0 VDC | 0 VDC |
| 1781731807 | 127 Count | 702 Count | 95 Count | 0 VDC | 0 VDC |
| 1781730906 | 123 Count | 684 Count | 92 Count | 0 VDC | 0 VDC |
| 1781730005 | 117 Count | 654 Count | 87 Count | 0 VDC | 0 VDC |
| 1781729105 | 112 Count | 632 Count | 83 Count | 0 VDC | 0 VDC |
| 1781728204 | 106 Count | 597 Count | 78 Count | 0 VDC | 0 VDC |
| 1781727304 | 100 Count | 570 Count | 73 Count | 0 VDC | 0 VDC |
| 1781726403 | 96 Count | 539 Count | 70 Count | 0 VDC | 0 VDC |
| 1781725502 | 91 Count | 512 Count | 66 Count | 0 VDC | 0 VDC |
| 1781724616 | 86 Count | 480 Count | 62 Count | 0 VDC | 0 VDC |
| 1781723716 | 79 Count | 448 Count | 56 Count | 0 VDC | 0 VDC |
| 1781722815 | 74 Count | 414 Count | 52 Count | 0 VDC | 0 VDC |
| 1781721914 | 71 Count | 392 Count | 50 Count | 0 VDC | 0 VDC |
| 1781721014 | 67 Count | 364 Count | 47 Count | 0 VDC | 0 VDC |
| 1781720113 | 62 Count | 332 Count | 43 Count | 0 VDC | 0 VDC |
| 1781719212 | 58 Count | 317 Count | 40 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)