This is the latest recevied telemetry packets stored in our database for station/object SR2ATJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765875537 | 11 Count | 282 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765873737 | 7 Count | 208 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765871936 | 3 Count | 46 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765870134 | 106 Count | 1024 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765868334 | 102 Count | 996 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765866533 | 98 Count | 924 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765864732 | 94 Count | 896 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765862932 | 90 Count | 831 Count | 0 Count | 3.97 VDC | 0 VDC |
| 1765861131 | 86 Count | 797 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765859330 | 82 Count | 759 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765857530 | 78 Count | 715 Count | 0 Count | 3.97 VDC | 0 VDC |
| 1765855729 | 74 Count | 687 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765853928 | 70 Count | 639 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765852128 | 66 Count | 608 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765850327 | 62 Count | 575 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765848526 | 58 Count | 545 Count | 0 Count | 3.97 VDC | 0 VDC |
| 1765846726 | 54 Count | 515 Count | 0 Count | 3.97 VDC | 0 VDC |
| 1765844925 | 51 Count | 480 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765843124 | 48 Count | 451 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765841324 | 46 Count | 415 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765839523 | 42 Count | 379 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765837722 | 40 Count | 346 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1765834138 | 28 Count | 272 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765832337 | 24 Count | 238 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1765830536 | 20 Count | 208 Count | 0 Count | 3.98 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)