This is the latest recevied telemetry packets stored in our database for station/object F5ZZW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773908166 | 566 Count | 523 Count | 475 Count | 0 VDC | 0 VDC |
| 1773907560 | 561 Count | 516 Count | 471 Count | 0 VDC | 0 VDC |
| 1773906952 | 556 Count | 511 Count | 467 Count | 0 VDC | 0 VDC |
| 1773906345 | 551 Count | 507 Count | 463 Count | 0 VDC | 0 VDC |
| 1773905739 | 536 Count | 485 Count | 449 Count | 0 VDC | 0 VDC |
| 1773905133 | 524 Count | 472 Count | 438 Count | 0 VDC | 0 VDC |
| 1773904527 | 516 Count | 461 Count | 431 Count | 0 VDC | 0 VDC |
| 1773903921 | 505 Count | 443 Count | 421 Count | 0 VDC | 0 VDC |
| 1773903314 | 487 Count | 423 Count | 404 Count | 0 VDC | 0 VDC |
| 1773902705 | 479 Count | 414 Count | 397 Count | 0 VDC | 0 VDC |
| 1773902099 | 472 Count | 406 Count | 391 Count | 0 VDC | 0 VDC |
| 1773901493 | 467 Count | 402 Count | 387 Count | 0 VDC | 0 VDC |
| 1773900887 | 461 Count | 397 Count | 382 Count | 0 VDC | 0 VDC |
| 1773900280 | 457 Count | 394 Count | 379 Count | 0 VDC | 0 VDC |
| 1773899674 | 450 Count | 388 Count | 373 Count | 0 VDC | 0 VDC |
| 1773899068 | 448 Count | 387 Count | 372 Count | 0 VDC | 0 VDC |
| 1773898461 | 444 Count | 384 Count | 369 Count | 0 VDC | 0 VDC |
| 1773897855 | 437 Count | 378 Count | 363 Count | 0 VDC | 0 VDC |
| 1773897249 | 432 Count | 374 Count | 359 Count | 0 VDC | 0 VDC |
| 1773896643 | 427 Count | 370 Count | 355 Count | 0 VDC | 0 VDC |
| 1773896036 | 420 Count | 364 Count | 349 Count | 0 VDC | 0 VDC |
| 1773895430 | 414 Count | 359 Count | 344 Count | 0 VDC | 0 VDC |
| 1773894824 | 409 Count | 355 Count | 340 Count | 0 VDC | 0 VDC |
| 1773894218 | 401 Count | 348 Count | 333 Count | 0 VDC | 0 VDC |
| 1773893612 | 396 Count | 344 Count | 329 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)