This is the latest recevied telemetry packets stored in our database for station/object SR8NDR-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1772720695 | 353 Count | 867 Count | 345 Count | 0 VDC | 0 VDC |
| 1772719494 | 323 Count | 796 Count | 316 Count | 0 VDC | 0 VDC |
| 1772718293 | 291 Count | 697 Count | 285 Count | 0 VDC | 0 VDC |
| 1772717093 | 257 Count | 607 Count | 252 Count | 0 VDC | 0 VDC |
| 1772715890 | 225 Count | 526 Count | 221 Count | 0 VDC | 0 VDC |
| 1772714689 | 194 Count | 444 Count | 191 Count | 0 VDC | 0 VDC |
| 1772713488 | 147 Count | 339 Count | 145 Count | 0 VDC | 0 VDC |
| 1772712288 | 89 Count | 216 Count | 88 Count | 0 VDC | 0 VDC |
| 1772711087 | 50 Count | 121 Count | 50 Count | 0 VDC | 0 VDC |
| 1772709886 | 557 Count | 1126 Count | 537 Count | 0 VDC | 0 VDC |
| 1772708685 | 473 Count | 988 Count | 454 Count | 0 VDC | 0 VDC |
| 1772707485 | 412 Count | 875 Count | 394 Count | 0 VDC | 0 VDC |
| 1772706284 | 374 Count | 796 Count | 357 Count | 0 VDC | 0 VDC |
| 1772705082 | 339 Count | 716 Count | 323 Count | 0 VDC | 0 VDC |
| 1772703881 | 287 Count | 606 Count | 272 Count | 0 VDC | 0 VDC |
| 1772702680 | 252 Count | 530 Count | 238 Count | 0 VDC | 0 VDC |
| 1772701479 | 217 Count | 458 Count | 204 Count | 0 VDC | 0 VDC |
| 1772700279 | 181 Count | 382 Count | 169 Count | 0 VDC | 0 VDC |
| 1772554765 | 131 Count | 281 Count | 129 Count | 0 VDC | 0 VDC |
| 1772553564 | 86 Count | 183 Count | 85 Count | 0 VDC | 0 VDC |
| 1772552364 | 27 Count | 58 Count | 27 Count | 0 VDC | 0 VDC |
| 1772551163 | 500 Count | 1086 Count | 476 Count | 0 VDC | 0 VDC |
| 1772548761 | 442 Count | 921 Count | 420 Count | 0 VDC | 0 VDC |
| 1772547561 | 412 Count | 855 Count | 391 Count | 0 VDC | 0 VDC |
| 1772546361 | 380 Count | 795 Count | 360 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)