This is the latest recevied telemetry packets stored in our database for station/object OK1FWG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1755760551 | 280 Count | 175 Count | 153 Count | 0 VDC | 0 VDC |
| 1755758748 | 277 Count | 173 Count | 151 Count | 0 VDC | 0 VDC |
| 1755756945 | 274 Count | 171 Count | 149 Count | 0 VDC | 0 VDC |
| 1755755142 | 269 Count | 169 Count | 147 Count | 0 VDC | 0 VDC |
| 1755753338 | 266 Count | 167 Count | 145 Count | 0 VDC | 0 VDC |
| 1755751535 | 261 Count | 163 Count | 141 Count | 0 VDC | 0 VDC |
| 1755749732 | 260 Count | 163 Count | 141 Count | 0 VDC | 0 VDC |
| 1755747929 | 256 Count | 161 Count | 139 Count | 0 VDC | 0 VDC |
| 1755746126 | 254 Count | 160 Count | 138 Count | 0 VDC | 0 VDC |
| 1755744323 | 251 Count | 158 Count | 136 Count | 0 VDC | 0 VDC |
| 1755742520 | 250 Count | 158 Count | 136 Count | 0 VDC | 0 VDC |
| 1755740717 | 246 Count | 157 Count | 135 Count | 0 VDC | 0 VDC |
| 1755738914 | 244 Count | 156 Count | 134 Count | 0 VDC | 0 VDC |
| 1755737111 | 242 Count | 155 Count | 133 Count | 0 VDC | 0 VDC |
| 1755735308 | 241 Count | 155 Count | 133 Count | 0 VDC | 0 VDC |
| 1755733505 | 238 Count | 155 Count | 133 Count | 0 VDC | 0 VDC |
| 1755731702 | 237 Count | 155 Count | 133 Count | 0 VDC | 0 VDC |
| 1755729899 | 235 Count | 154 Count | 132 Count | 0 VDC | 0 VDC |
| 1755728096 | 234 Count | 154 Count | 132 Count | 0 VDC | 0 VDC |
| 1755726293 | 231 Count | 154 Count | 132 Count | 0 VDC | 0 VDC |
| 1755724490 | 230 Count | 154 Count | 132 Count | 0 VDC | 0 VDC |
| 1755722687 | 229 Count | 154 Count | 132 Count | 0 VDC | 0 VDC |
| 1755720884 | 228 Count | 154 Count | 132 Count | 0 VDC | 0 VDC |
| 1755719080 | 225 Count | 154 Count | 132 Count | 0 VDC | 0 VDC |
| 1755717277 | 224 Count | 154 Count | 132 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)