This is the latest recevied telemetry packets stored in our database for station/object SP3NGH-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1772564941 | 58 Count | 277 Count | 5 Count | 0 VDC | 0 VDC |
| 1772563140 | 53 Count | 266 Count | 4 Count | 0 VDC | 0 VDC |
| 1772561339 | 48 Count | 253 Count | 3 Count | 0 VDC | 0 VDC |
| 1772559537 | 43 Count | 241 Count | 2 Count | 0 VDC | 0 VDC |
| 1772557738 | 33 Count | 230 Count | 1 Count | 0 VDC | 0 VDC |
| 1772555983 | 28 Count | 221 Count | 0 Count | 0 VDC | 0 VDC |
| 1772554180 | 24 Count | 220 Count | 0 Count | 0 VDC | 0 VDC |
| 1772552411 | 19 Count | 220 Count | 0 Count | 0 VDC | 0 VDC |
| 1772550578 | 15 Count | 213 Count | 0 Count | 0 VDC | 0 VDC |
| 1772548777 | 11 Count | 132 Count | 0 Count | 0 VDC | 0 VDC |
| 1772546977 | 7 Count | 71 Count | 0 Count | 0 VDC | 0 VDC |
| 1772545176 | 3 Count | 36 Count | 0 Count | 0 VDC | 0 VDC |
| 1772543374 | 299 Count | 1002 Count | 44 Count | 0 VDC | 0 VDC |
| 1772541573 | 294 Count | 966 Count | 44 Count | 0 VDC | 0 VDC |
| 1772539908 | 290 Count | 929 Count | 44 Count | 0 VDC | 0 VDC |
| 1772537963 | 286 Count | 880 Count | 44 Count | 0 VDC | 0 VDC |
| 1772536155 | 282 Count | 847 Count | 44 Count | 0 VDC | 0 VDC |
| 1772534353 | 277 Count | 811 Count | 44 Count | 0 VDC | 0 VDC |
| 1772532552 | 273 Count | 765 Count | 44 Count | 0 VDC | 0 VDC |
| 1772530751 | 269 Count | 691 Count | 44 Count | 0 VDC | 0 VDC |
| 1772528949 | 262 Count | 601 Count | 43 Count | 0 VDC | 0 VDC |
| 1772527148 | 257 Count | 534 Count | 42 Count | 0 VDC | 0 VDC |
| 1772525347 | 250 Count | 496 Count | 39 Count | 0 VDC | 0 VDC |
| 1772523546 | 245 Count | 459 Count | 38 Count | 0 VDC | 0 VDC |
| 1772521756 | 240 Count | 434 Count | 37 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)