This is the latest recevied telemetry packets stored in our database for station/object LU2EQD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1772552485 | 105 Count | 902 Count | 0 Count | 0 VDC | 0 VDC |
| 1772550684 | 104 Count | 891 Count | 0 Count | 0 VDC | 0 VDC |
| 1772548902 | 103 Count | 871 Count | 0 Count | 0 VDC | 0 VDC |
| 1772547101 | 102 Count | 852 Count | 0 Count | 0 VDC | 0 VDC |
| 1772545300 | 101 Count | 839 Count | 0 Count | 0 VDC | 0 VDC |
| 1772543498 | 100 Count | 821 Count | 0 Count | 0 VDC | 0 VDC |
| 1772541698 | 99 Count | 808 Count | 0 Count | 0 VDC | 0 VDC |
| 1772539896 | 98 Count | 800 Count | 0 Count | 0 VDC | 0 VDC |
| 1772538311 | 97 Count | 788 Count | 0 Count | 0 VDC | 0 VDC |
| 1772537309 | 96 Count | 771 Count | 0 Count | 0 VDC | 0 VDC |
| 1772534486 | 95 Count | 755 Count | 0 Count | 0 VDC | 0 VDC |
| 1772532685 | 94 Count | 754 Count | 0 Count | 0 VDC | 0 VDC |
| 1772530884 | 93 Count | 739 Count | 0 Count | 0 VDC | 0 VDC |
| 1772529083 | 92 Count | 722 Count | 0 Count | 0 VDC | 0 VDC |
| 1772527291 | 91 Count | 714 Count | 0 Count | 0 VDC | 0 VDC |
| 1772525491 | 90 Count | 707 Count | 0 Count | 0 VDC | 0 VDC |
| 1772523690 | 89 Count | 697 Count | 0 Count | 0 VDC | 0 VDC |
| 1772521889 | 88 Count | 688 Count | 0 Count | 0 VDC | 0 VDC |
| 1772520089 | 87 Count | 677 Count | 0 Count | 0 VDC | 0 VDC |
| 1772518288 | 86 Count | 663 Count | 0 Count | 0 VDC | 0 VDC |
| 1772516487 | 85 Count | 651 Count | 0 Count | 0 VDC | 0 VDC |
| 1772514686 | 84 Count | 642 Count | 0 Count | 0 VDC | 0 VDC |
| 1772512886 | 83 Count | 612 Count | 0 Count | 0 VDC | 0 VDC |
| 1772511085 | 82 Count | 595 Count | 0 Count | 0 VDC | 0 VDC |
| 1772509283 | 81 Count | 586 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)